User Manual

Bell Crank Lever
[H0406BM-S]
- 2 x Tail Pin.
- 1 x Uniball M2.
- 1 x Uniball Spacer.
- 1 x Bell Crank Lever.
- 2 x Flanged Bearing
3x 7x3mm.
- 1 x Head Cap Screws M3x22mm.
- 1 x Head Cap Screws M2x8mm.
- 1 x Washer
3x 4x0.5mm.
- 1 x Spacer
3x 4x9.6mm.
Swashplate Set HPS
[H0422BM-S)
- 1 x Swashplate Assembly.
- 2 x Bearings
30x 37x4mm.
- 6 x Uniballs M3x4 5 H3.
- 1 x Uniball M3x4 5 H18.
- 3 x Head Cap Screws M2x5mm.
- 3 x Swasher
2x 5x0.5mm
Damper
[H0426-S)
- 3 x H0426-A.
- 3 x H0426-B.
- 3 x H0426-C.
- 3 x Washers
10x 16x1mm.
- 3 x Washers
10x 16x0.2mm.
- 3 x Orings 3050.
Boom Thunder Sport
[H0930-S]
- 2 x Head Cap Screws M3 x 12mm.
- 2 x Nylon Screw M8x20mm.
- 1 x Flat Head Cap Screws M3x8mm.
- 1 x Boom Thunder Sport.
- 2 x Locking Element Tails.
- 2 x D ouble-Sided Tapes .
- 1 x Set Screws M3 x 20mm .
- 2 x Washers 3.1 x 12 x 1.8mm.
- 4 x Metric Hex Nylon Nuts M3.
- 2 x Boom spacers.
Canopy Thunder Sport
[H0929-S]
- 1 x Canopy Thunder Black.
- 1 x Canopy Grommet.
- 1 x Canopy Mousse.
- 1 x Canopy Edge Protection.
Main Frame
[H0362-S]
- 1 x Main Frame.
Plastic Ball Link
[H0402-S]
- 5 x Plastic Ball Link. - 1 x CNC Derlin Main Gear Set.
CNC Derlin Main Gear
[H0405-S]
Tail Pitch Slider
[H0407-S]
- 1 x Tail Pitch Slider SET.
Blade Grip
[H0719BM-S]
- 2 x Blade Grip.
- 2 x Thrust Bearing
10x 18x5.5mm.
- 4 x Bearing
10x 19x5mm.
- 2 x Washer
10x 16x1mm.
- 2 x Socket Head Cap Screw M4x10mm.
Vertical Fin
[H0684-S]
- 1 x Vertical Fin.
- 2 x Sticker .
Main Linkage
[H0417-S]
- 2 x Main Linkage.
- 4 x Uniballs M3.
F3C Landing Gear Set
[H0454-S]
- 2 x Plastic Landing Gear Support.
- 2 x Aluminum Landing Skid.
- 4 x Cone Point Set Screws M4x4.
- 4 x Aluminum M3 Washer.
- 4 x Head Cap Screw M3x16mm.
- 4 x M3 Lock Nut.
FBL Support Low
[H0727-S]
- 3 x FBL Support Low.
- 5 x Head Cap Screw M3x8mm.
- 1 x Flat Head Cap Screw M3x8mm.
Main Frame
[H0931-S]
- 1 x Main Frame.
Landing Gear Rod
[H0431-S]
- 2 x Landing Gear Rod.
- 4 x Landing Gear Plug.
- 4 x OR DI=6,75, S=1,78.
Page 34
Chapter 17, Spare Parts