User Manual

[HC200-S] [HC206-S]
- 8 x Metric Hex Nylon
Nuts M2,5H3,5.
[HC212-S] [HC218-S] [HC230-S]
- 1 x Belt Gates
1926-3GT-06mm.
- 3 X Thread Rods
M2.5 x 40mm.
[HC242-S]
[HC324-S]
[HC232-S]
[HC309-S]
[HC411-S]
[HC420-S]
[HC414-S]
[HC418-S]
- 2 x Flanged Bearings
6x 13x4mm.
- 2 x Flanged Bearings
8x 12x3.5mm.
- 2 x Bearings
10x 15x4mm.
[HC410-S]
- 4 x Flanged Bearings
3x 7x3mm.
- 4 x Flanged Bearings
2.5x 6x2.6mm. - 4 x Tail Oring Damper.
- 2 x Spring 5,8/df 0,3.
- 1 x Spring 8 /df 0,5.
- 2 x Spring 3 /df 5.
[HC400-S][HC335-S]
- 1 x Motor Belt
240-3MGT 19mm.
[HC402-S]
[HC315-S]
[HC422-S] [HC426-S]
[HC438-S]
- 4 x Bearings
10x 19x5mm.
[HC430-S]
[HC435-S]
- 2 x Rad Bearings
30x 37x4mm.
- 2 x Thrust Bearings
5x 10x4mm.
[HC442-S]
- 2 x Cable Pass.
- 1 x Canopy Mousse.
- 2 x Double-sided Tape.
- 1 x Foam Blade Holder.
[HA006-S][HA001-S]
- 1 x One Way Bearings
10x 14x12mm.
[HA010-S]
[HA015-S]
- 4 x Flanged Bearings
5x 9x3mm.
- 2 x Bearings
12x 24x6mm.
- 8 x Metric Hex Nylon
Nuts M3H4.
- 8 x Metric Hex Nylon
Nuts M4H5.
- 8 x Metric Hex Nylon
Nuts M5H4.5.
- 5 x Shims
Ø10xØ16x1mm.
- 5 x Shims
Ø10xØ16x0.2mm.
- 2 x Thrust Bearings
10x 18x5.5mm.
- 8 x Washer
Ø6.3xØ15x1mm.
[HC194-S]
- 4 x Bearings
5x 10x4mm.
[HC447-S]
- 1 x Spherical Bearing
12x 22x7mm.
[HA016-S] [HA024-S] [HA025-S] [HA026-S]
[HA111-S]
- 1 x Wrench Nuts M8. - 4 x OR 3050. - 2 x Big Straps. - 4 x Heats Sink.
- 4 x Canopy Grommet.
[HC239-S]
- 1 x Carbon Rod Ø4xØ2,5x702mm.
- 2 x Plastic Ball Linkage.
- 2 x Thread Rod M2.5x40mm.
Page 36
Chapter 17, Spare Parts