User Manual

Tail Blade Grips
[H1033-S]
- 2 x Aluminum Tail Blade Grip.
- 4 x Bearing Ø5xØ10x4mm.
- 2 x Thrust bearing Ø5xØ10x4mm.
- 2 x Button Head Cap M4x8mm.
- 2 x Socket Head Cap M2x6mm.
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
- 1 x Blade Grip.
- 1 x Thrust Bearing
10x 18x5.5mm.
- 2 x Bearing
10x 19x5mm.
- 1 x Washer
10x 16x1mm.
- 1 x Socket Head Cap Screw M4x10mm.
Main Blade Grips
[H1044-S]
Blade Grip Arm 30
[H1045-S]
- 2 x Blade Grip Arm.
- 2 x Head Cap Screw M4x10mm.
- 2 x Uniball M3x4 Ø5 H3.5.
Damper
[H1046-S]
Swashplate
[H1047-S]
Reference Pin
[H1048-S]
Motor Mount
[H1058-S]
Rear Servo Mount
[H1059-S]
Boom Connetion
[H1061-S]
Main Front Pulley
[H1062-S]
Front Tail Pulley 27T
[H1063-S]
Battery Tray Guide
[H1067-S]
ESC Support
[H1068-S]
Low Side Frame Mount
[H1069-S]
Plastic Landing Gear Support
[H1070-S]
- 2 x Damper B.
- 6 x Oring 90 Shore .
- 1 x Swashplate Assembly.
- 7 x Uniball M3.
- 1 x Reference Pin.
- 1 x Reference Pin.
- 1 x Motor Mount.
- 2 x Set Screws M5x15mm.
- 2 x Washers
5.3x 15x1mm.
- 2 x Nylon Nuts M5H4.8.
- 2 x Finishing Washers M3.
- 2 x Head Cap Screws M3x10mm.
- 1 x Rear Servo Mount.
- 2 x Finishing Washer M3.
- 2 x Head Cap Screws M3x8mm.
- 1 x Boom Connetion.
- 4 x Button Cap Screws M4x10mm.
- 1 x Main Front Pulley.
- 1 x Head Cap Screws M4x20mm.
- 1 x Front Tail Pulley 27T.
- 1 x Head Shoulder M3x16mm.
- 1 x Nylon Nut M3.
- 2 x Battery Tray Guide.
- 4 x Head Cap Screws M3x6mm.
- 2 x Head Cap Screws M3x10mm.
- 1 x ESC Support.
- 1 x ESC Mount Plate.
- 2 x Head Cap Screws M3x10mm.
- 2 x Flat Cap Screws M3x10mm.
- 4 x Nylon Nut M3.
- 2 x Low Side Frame Mount.
- 2 x Head Cap Screws M3x10mm.
- 1 x Plastic Landing Gear Support.
- 2 x Set Screws M4x4mm.
- 2 x Nylon Nut M3.
Tail Belt Tensioner
[H1064-S]
- 1 x Tail Belt Arm Assembled.
- 1 x Tail Belt ilder Assembled.
- 1 x Tail Belt Column.
- 1 x Tail Belt Spring Support.
- 1 x Tail Belt Spring.
- 1 x Head Cap Shoulder M3x18mm.
- 1 x Head Cap Screws M3x8mm.
- 1 x Head Cap Screws M2x6mm.
- 2 x Washers
3.2x 6x0.5mm.
Center Hub
[H1043-S]
- 1 x Center Hub.
- 2 x Socket Head Cap M4x24mm.
- 2 x Socket Head Cap M3x12mm.
- 1 x Nylon Nut M4.
Page 42
SPARE PARTS