User Manual

- 1 x Canopy Kraken.
- 2 x Canopy Grommet.
Canopy Kraken
[H1075-S]
- 1 x Tail Boom Kraken.
- 2 x Locking Element Tail.
- 4 x Metric Hex Nylon Nuts M3.
Tail Boom Kraken
[H1074-S]
- 1 x Canopy Front Block.
- 4 x Nylon Nut M2.5.
- 4 x Head Cap Screws M2.5x10mm.
Canopy Front Block
[H1073-S]
- 2 x Landing Gear Rod.
- 4 x Plug.
Landing Gear Rod
[H1071-S]
Battery Carbon SET
[H1085-S]
Low Side Frame DX
[H1081-S]
- 1 x Main Frame.
- 2 x M4 Bushing.
Main Frame
[H1082-S]
- 1 x Low Side Frame SX.
Low Side Frame SX
[H1080-S]
Tail Bell Crank Lever
[H1090-S]
- 1 x Tail Shaft.
- 1 x Tail Hub.
- 2 x Tail Oring.
Tail Shaft
[H1089-S]
Carbon Fiber Side Plate
[H1096-01-S]
Bell Crank Base
[H1095-S]
- 2 x Double Sided Tapes.
- 1 x Nut Block.
Frame Spacer
[H1076-S]
- 1 x Frame Spacer.
- 2 x Head Cap Screws M3x10mm. - 1 x Low Side Frame DX.
- 1 x Xross Battery. - 1 x Alu Pin.
- 1 x Carbon Pin Support. - 1 x Brass lever.
- 1 x Head Cap M2.5x12. - 2 x Washer M2.5.
- 2 x Head Cap M2.5x8.
- 5 x Flat Screws M2.5x5.
Swashplate Reference
[H1088-S]
- 1 x Swashplate reference.
- 2 x Head Cap Screws M3x10mm.
- 1 x Bell Crank Lever Assembled.
- 1 x Head Cap Screws M3x22mm.
- 1 x Head Cap Screws M2x6mm.
- 2 x Washer
3.2x 6x0.1mm.
Tail Case Spacer
[H1093-S]
- 1 x Tail Case Spacer.
- 4 x Head Cap Screws M3x8mm.
- 1 x Bell Crank Base.
- 2 x Head Cap Screws M2.5x8mm.
- 1 x CF Side Plate.
- 1 x Flanged Bearing
6x 13x5mm.
Page 43
SPARE PARTS