User Manual

Clean and inspect GoBone frequently. Carefully inspect all GoBone components for cracks,

separations and missing pieces before giving to your dog. Check frequently and replace worn or

damaged parts immediately.

Your dog’s safety is your responsibility. As with any dog toy, we recommend supervised play

until you’re confident that your dog will not destroy GoBone. If you think your dog has swallowed

a GoBone fragment, promptly call your veterinarian.

Multiple dog households. If you have multiple dogs in your household, only provide GoBone

products for the largest, strongest chewer in the house.

Power chewers. Although GoBone's exterior is made of tough nylon and TPU, GoBone is not

recommended for dogs that are power chewers or dogs that can quickly destroy other chew

toys.

Getting Started

Charging GoBone

Connect the GoBone Core to a power source using the included charging cable. We

recommend charging GoBone from a wall socket using your smartphone’s charging brick.

It will take up to 90 minutes for a full charge from a wall socket. The LED will pulse green while

GoBone charges. Once it's fully charged, the LED will turn solid green. When it's low on battery,

the LED will pulse red.

For fastest charging, do not charge GoBone from a USB port.

Assembling & Dismantling GoBone

Assemble GoBone

1. SLIDE the fully charged core into the shell. Make sure the Quick Release Button on the

core locks into the shell.

2. SLIDE one wheel on each end of the core.

3. PRESS the inside of each wheel with your thumb to lock into place.

4. SQUEEZE the wheels together until you hear the wheels click to secure.

5. PULL on both wheels to make sure they are on securely attached.