Operation Manual

12
Connecting Amplifier or Decoder (Figure D)
1. Antenna (Not included)
2. DVB-T Receiver
3. Amplifier or Decoder (Not Included)
Fast Installation
Connect this unit and other apparatus according to
Chapter “BASIC CONNECTIONS”. Plug the power cord
and wait “Installation Guide” window appears:
1. Use [CH▲/▼] button to select item and [VOL◄/►]
button to enter in its setup interface.
2. The default OSD Language is “English”, country is
“England”.
3. Move cursor to ”Channel Search” and press [OK] button
to start auto search.
4. Press [EXIT] button to back to channel list after auto
search has been done. Press [OK] button to display
channel list, use [CH▲/▼] button to select channel and press [OK] button to enjoy watching.
If the “Installation Guide” does not appear:
5. Press [MENU] button, move cursor to “Tools” and press [OK] button to enter in its interface
to load factory default. Default password is “000000”. (This step must be done at first use or
after upgrade.)
6. Press [OK] button to start load factory default.
7. After the factory default has been done, wait “Installation Guide” window and please operate
according to step 1, 2, 3 and 4.
Read Advanced Operation for more details.