Operation Manual

16
3. Channel Search
Move cursor to “Channel Search” and press [OK] button to enter in its submenu. There are 4
submenus which are listed below.
 Auto Search
 Manual Search
 Country
 Antenna Power
3.1 Auto Search
Use [CH▲/▼] buttons to select “Auto Search “and press [OK] button to start auto search.
3.2 Manual Search
Use [CH▲/▼] buttons to select “Manual Search” and press [OK] button to enter in “manual
search” interface. Press [VOL◄/►] buttons to set up “Channel No.”, “Frequency” and
”Bandwidth”. Press [OK] button to start search.
3.3 Country
Select this submenu with [CH▲/▼] buttons, and use [VOL◄/►] buttons to shift the options:
Czech,Italy,Sweden,Poland,Austria,Croatia,Greece,Rumania,Finland,Bulgaria,Russia,
Australia,,Iran,Spain,Portugal,France,Netherlands,Serbia,Germany,Belgium,Hungary,Danmar
k,Slovenia,Luxembourg, Norway.
The default country is England.
3.4 Antenna Power
 On
 Off
The default status is OFF.
4. Time
Move cursor to “Time” and press [OK] button to enter in its submenu. There are 4 submenus
which are listed below.
 Time Offset
 Country Region
 Time Zone
 Power Down After
4.1 Time Offset
 Auto
 Manual