User's Manual
15
功能介绍
Features
3. To cancel the password, clear the password and conrm.
4. To change the password, key in the old password rst, and then
enter the new password to rewrite.
5. When you forget the password, you can perform factory reset or
reprogram it.
Sub-Code Frequency Conguration
1. The sub-code frequency supports CTCSS, DCS positive code, DCS
reverse code, standard sub-code and non-standard sub-code.
2. Only when the transmitting sub-code and receiving sub-code are
the same can they communicate to each other.
3. A radio with sub-code can transmit to radio without, but cannot
receive signal without sub-code.
Scan List Conguration
1. The scan list can contain analog channels and digital channels.
2. After conguring the scan list, the scan switch should be turned on.
3. Turn on/o the scan list through preprogrammed [P1/P2] key.
4. During scanning, the channels scanned include the channels in the
scan list and the current main channel.
5. When any channel in the scan list is transmitting a signal, it will stay
on that channel upon signal detection.
High/Low Power
1. Set the high/low power through preprogrammed [P1/P2]key.
2. The programming software can set the high/low power for each
channel according to the use condition.
3. If set to high power, the transmission distance is long, but with
higher power consumption, which may shorten the battery life.
功能介绍
Features