User's Manual

熟悉本机

Belt Clip Installation

1. Align the guide groove of the belt clip to the belt clip holder on the

battery cover and install it appropriately.

Accessory Installation

Step 1: Open the accessory

connector cover.

Step 2: Align the plug of the

accessory (matching headset

or programming cable) with the

accessory connector.

Step 3: Insert the accessory

properly into the accessory

connector.

2.Take out the belt clip to the following angle with belt clip bottom face

up, and remove it toward the top.

Note: The belt clip can

be installed from any

direction, clip on the belt,

and the radio can rotate

180 degrees.

Figure 1 Figure 2

Know the Radio