User's Manual

13
功能介绍
Power On/O󰀨
To turn on radio, press and hold [Power] key 3 seconds. To turn off
radio, press and hold the [Power] key to turn o󰀨 the radio and prompt
tone will be sounded.
Check Channel and
Battery Level status
In standby mode, press the power button to check Channel and Battery
Level status.
Volume Control
press [+] or [-] key to increase or decrease the volume. the volume is
adjustable from level 0 to 7.
Note: When press [+] again under the maximum radio volume, the
speaker of radio will prompt an error sound. When the volume is
adjusted to the minimum by pressing [-] key, the radio is muted.
Transmitting/Receiving
Hold the [PTT] key to transmit the signal of the current channel and the
red LED indicator is on. Release the [PTT] key to receive the signal
from the same channel, the speaker will make a call sound and the
green LED indicator will be on.
Precautions for Radio Operation
·
When the radio is transmitting, keep the radio in a vertical position,
·
During charging, it is not recommended to transmit the radio.
·
The battery pack may slightly heat up during charging, which is a
normal phenomenon.
Know the Radio