User's Manual

16
功能介绍
is selected, the user can keep on transmitting.
Voice Control Function
(preset by [Program] key)
1. Preset the [Program] key to [VOX On/O󰀨] key through programming
software.
2. Press the preset [VOX On/O󰀨] key to turn on/o󰀨 the voice control
function. VOX levels can be preset through programming software:
Level 1, Level 2, and Level 3, where Level 3 is the most sensitive.
When the radio VOX function is on, the preset VOX level is used.
Monitoring mode
(preset by [Program] key)
1. Preset the [Program] key to monitoring function through
programming software.
2. Press and hold the [Program] key to enter monitoring mode and
release the key to exit the mode.
Power Saving Function
The power saving function can be enabled/disabled by programming
software.
Low Voltage Alarm Function
1. When the battery voltage is less than one grid (picture), the radio
will prompt "Please charge" once (every 20 seconds) and the
battery indicator will ash quickly. At this time, the radio cannot
transmit and stays in standby and receiving modes only. Please
charge the battery.
2. When the battery power is lower than the standby voltage, the radio
Features