User's Manual

功能介绍

will shut down automatically. Please charge the battery.

Program Key

1. Congure the functions of [Program] key through programming software.

2. The [Program] key of analog Mode includes the following functions:

VOX On/O󰀨, Monitoring Mode, Sub-audio Frequency On/O󰀨.

3. The [Program] key of digital Mode includes the following functions:

Scan On/O󰀨, High/Low Power Switch, VOX On/O󰀨, Monitoring

Mode, DM On/O󰀨, One Touch Call, Emergency Call, etc.

4. Write the set parameters to the radio and press the corresponding

[Program] key to enter the corresponding function.

CTCSS/DCS

1. Only analog mode can set CTCSS/DCS.

2. CTCSS/DCS can set via programming software.

3. Only both transmit and receive are set the same can talk to each other.

Tail Tone Elimination

This function is only valid for analog channels:

1. When the tail tone elimination function is enabled, the receiver will

not have tail tone after the transmission is completed; otherwise,

there will be tail tone.

2. There are two types of tail tone elimination: 55HZ and 62HZ.

Setting/Changing Frequency

1. In direct mode (DM) mode, you can talk only when the transmitting

frequency and receiving frequency are the same.

2. Digital radio: In DMR relay mode, the transmitting frequency and receiving

frequency are di󰀨erent, but it needs to be used together with repeater.

Features