User's Manual
21
3. The transmitter's red indicator stays on for a few seconds, and then
press the [PTT] key to transmit.
4. The receiver's green indicator stays on for a few seconds, and then
it can receive normally.
Remote Monitor(private call only)
1. Congure monitor feature through programming software.
2. Press the programmable key to monitor the other party remotely.
3. After successful monitoring, the green indicator will always be on,
and the sound around the other party can be clearly monitored.
4. Remote monitoring time can be set to 10s-120s.
Remote Kill (private call only)
1. Congure remote kill feature through programming software.
2. Press programmable key to execute remote kill command.
Note: The other party cannot operate normally after remote kill,
including intercom, menu operation and shutdown.
Activate (private call only)
1. The activation command is to remove kill status.
2. After sending activation command, it can change the other party
from remote kill state to active state. After restarting, it can be used
normally.
Backlight Time
1. Backlight refers to the timer when the LCD screen of the radio is on,
and the screen is o after waiting for the set time in standby state.
2. The backlight options are: on, 5s, 10s, 15s, 30s, maximum 180s.
3. After the screen is o, the screen will be on when a signal is received.
功能介绍
Features