User's Manual

17
功能介绍
Features
enter the new password to rewrite.
5. When you forget the password, you can perform factory reset or
reprogram it.
Sub-Code Frequency Conguration
1. The sub-code frequency supports CTCSS, DCS positive code, DCS
reverse code, standard sub-code and non-standard sub-code.
2. Only when the transmitting sub-code and receiving sub-code are
the same can they communicate to each other.
3. A radio with sub-code can transmit to radio without, but cannot
receive signal without sub-code.
Channel Spacing
1. There are one type of channel spacing: 12.5K.
2. Radios with same frequency point and di󰀨erent channel spacing
can communicate to each other.
Frequency Conguration
1. Frequency range: 430MHZ-470MHZ.
2. The frequency can be set to any value within this range.
3. In DM mode, you can only communicate when the transmitting
frequency and receiving frequency are the same.
4. In DMR relay mode, the transmitting frequency and receiving
frequency are di󰀨erent, but it needs to be supported by repeater.
Scan List Conguration
1. The scan list can contain analog channels and digital channels.
2. After conguring the scan list, the scan switch should be turned on.
功能介绍
Features