User's Manual
18
3. Turn on/o the scan list through menu operation or the preset [P1/
P2] key.
4. After scanning is turned on, a scan icon will ash on the screen.
5. During scanning, the channels scanned include the channels in the
scan list and the current main channel.
6. When any channel in the scan list is transmitting a signal, it will stay
on that channel upon signal detection.
High/Low Power
1. Set the high/low power through menu options.
2. The programming software can set the high/low power for each
channel according to the use condition.
3. If set to high power (4W), the transmission distance is long, but with
higher power consumption, which may shorten the battery life.
4. If set to low power (1W), the transmission distance is short, but the
low power consumption.
DTMF Conguration
1. The DTMF interface of the programming software can congure
the DTMF function related parameters, such as side tone,
duration, interval time, online telegram code, oine telegram code,
transmission start sound, transmission end sound, transmission
start and end sound.
2. After the transmitter turns on the side tone, when the [PTT] key is
pressed to transmit, the transmitter itself will also give DTMF sound.
3. DTMF coded content only supports numbers 0~9, letters: ABCD,
and characters: * #.
Emergency Call
1. Congure functions of the alarm system through programming
功能介绍
Features
功能介绍
Features