User's Manual

20
Contacts
1. Contacts are only valid for digital channels.
2. There are three kinds of contacts: private call, group call and all
call; and each digital channel needs to be set through programming
software.
3. When making private call, only when the frequency is the same, the
other party's ID exists and is in standby state communication can be
made.
4. When making group call, pay attention to whether the contact is in
the receiving group, and all radios in the same receiving group can
receive the speech.
5. When making all call, all channels with the same frequency can
receive the speech, and the all call ID is xed.
6. Manually enter the number to call the other party (know the ID
number of the other party).
7. The contact name or ID number is displayed on the screen when
the contact is called or answered.
Short Message
1. Modify the default quick message content to other characters by
programming software.
2. You can delete the quick message content by programming
software.
3. Up to 8 quick messages are supported.
4. New short message content can be created through the radio menu.
5. You can send a quick message to a private call contact.
6. You can send a quick message to the group call contact, and all the
radios in the group can receive the message.
7. After creating a new message, you can send it to a private call
contact, group call contact or manually key in contact and send to a
private call or group call contact.
功能介绍
Features
功能介绍
Features