User's Manual

whom the remote monitor will be sent for conrmation, enter “Server”,

and select “Remote Monitor” for sending.

Enter “Menu” – “Contacts” – “Dial”, enter the other party’s device ID

for conrmation, and select “Remote Monitor” for sending.

Press “#” on the standby interface to enter the dial-up interface,

enter the other party’s device ID under the private call type for

conrmation, and select “Remote Monitor” for sending.

Congure “One touch call” through CPS and send “Remote

Monitor”.

Radio Check (Private call only)

Radio check is used to check whether it can communicate normally

with the other party.

1. The method of sending “Radio Check” is as follows:

Enter “Menu” – “Contacts” – “Contact List”, select the contact to

whom Radio Check will be sent for conrmation, enter “Server”, and

select “Rad Check” for sending.

Enter “Menu” – “Contacts” – “Dial”, enter the other party’s device ID

for conrmation, and select “Radio Check” for sending.

Press “#” on the standby interface to enter the dial-up interface,

enter the other party’s device ID under the private call type for

conrmation, and select “Radio Check” for sending.

Congure “One touch call” through CPS to send “Radio Check”.

4. After “Radio Check” is sent successfully, it will prompt “Send OK”,

otherwise it will prompt “Send Fail”.

5. After “Radio Check” is received, there will be no interface alert, and

the device will automatically reply.

Radio Disable/ Kill (Private call only)

In case of loss of the device or other circumstances, in order to prevent

the other party from using the device, the device remotely deactivated

功能介绍

Features

功能介绍

Features