User's Manual

24
3. After receiving “Rad Enable”, the remotely inhibited device will
automatically restart and return to normal. After receiving “Rad
Enable”, the device that is not remotely inhibited will have no other
reaction except for automatic reply.
VOX Function
When voice control function is enabled, the radio will automatically
transmit after the microphone picks up enough sound input, and exit
the transmit mode after not picking up sound input.
1. Preset the [Program] key to [VOX On/O󰀨] key through programming
software.
2. The side key is equipped with a VOX switch and has an "On"/"O󰀨"
prompt sound. VOX levels can be preset through programming
software: Level 1, Level 2, and Level 3, where Level 3 is the most
sensitive. When the radio VOX function is on, the preset VOX level
is used.
3. After VOX is enabled, it works on both analog and digital channels.
4. VOX needs to insert the VOX headset, and the speech can be
directly transmitted by speaking to the headset MIC without needing
to press the [PTT] key. On the contrary, IVOX transmits directly by
obtaining the sensitivity through the radio MIC. If the sensitivity of
radio is low, VOX transmission will not be triggered. The speech can
be transmitted only after the sensitivity reaches the transmission
threshold.
5. VOX delay detection time refers to the waiting time after VOX is
transmitted.
TOT Function
In order to prevent some users from occupying the same channel
for a long time, users can set to enable the TOT function. When the
user's continuous transmission time on the current channel reaches
功能介绍
Features
功能介绍
Features