User's Manual

26
3. Roger beep tone elimination can also be enabled directly through
the radio menu.
Power saving function
To extend battery life, the user can enable power saving mode. When
the power saving function is enabled, When the display backlight is
turn o󰀨, , the radio will automatically enter the power saving mode. In
the power saving mode, the user can press [PTT] key to transmit or the
radio can receive normally when a signal is detected. The power saving
function can be enabled/disabled by programming software.
1. The power saving function supports three settings (ratio of sleep to
wake up), i.e. 1:1, 1:2 and 1:4.
2. After the power saving function is enabled, both the analog channels
and digital channels can enter the power saving mode normally in
standby state.
3. When a signal is received during sleep, it will wake up quickly.
Language Selection
Supported language: Chinese and English.
1. Language can be set by programming software and radio menu.
2. After switching the language, all menu options will be changed to
the selected language.
3. The radio voice announcement is defaulted to English.
Backlight Time
1. Backlight refers to the time when the LCD screen of the radio is on,
and the screen is o󰀨 after waiting for the set time in standby state.
2. The backlight options are: on, 5s, 10s, 15s, 30s, maximum 180s.
3. After the screen is o󰀨, the screen will be on when a signal is
received.
功能介绍
Features
功能介绍
Features