User Guide

Install the Back Panel

Remove the back panel of the thermostat by pushing down the thumb tab on the bo om of the body.

Figure 3. Removing back panel of thermostat.

Mount the thermostat back panel on the wall (See Figure 4).

1. Use the two (2) wall anchors and two (2) Phillips screws (provided) to mount the back panel.

2. Level as needed.

Figure 4. Mounting the Back Panel

BACK PANEL

BODY (WITH PCB)

PUSH ON THUMB TAB TO RELEASE

BACK PANEL

Y2 Y1 G RC C RH W1 W2 Standard

Y2 Y1 G R C R WI 0 Heat Pump

ANCHORS (2) PROVIDED

PHILLIPS SCREWS (2) PROVIDED