Installation Guide

Copyright © 2015 Nortek Security & Control LLC 23
Clock Menu
Use the clock menu to set thermostat’s internal clock.
Figure 26. Clock Setup
Seƫ ng the Clock
1. Press any bu on to take thermostat out of sleep mode.
2. Press FAN bu on for 5 seconds un l, SETUP appears in status display line.
3. Use  bu ons to select CLOCK in status display line.
4. Press SELECT, DAY will be displayed
5. Press  bu ons, TIME will be displayed.
6. Use the  bu ons to select the current  me.
7. Press SELECT, DONE, DONE.
INFO Menu
The INFO menu displays informa on about the thermostat. Use the  bu ons to scroll through
the various items.
• MODEL NTBZ48
• VERSION Thermostat fi rmware version.
• ZWAVE Z-Wave fi rmware version.
• NODE ID Z-Wave Node ID.
• HOME ID Z-Wave Home ID.
• SYSTEM TYPE displays current System Type se ng.
• If System Type = Standard, FAN TYPE displays current Fan Type se ng.
• If System Type = Heat Pump, CHANGEOVER TYPE displays current Change Over se ng.
• Ba ery xx% = Ba ery Level (If ba ery powered)
MODE
FAN
Select
Done
CLOCK
USE THE 
BUTTONS TO CHANGE
TO THE DESIRED MENU
ITEM, THEN PRESS
SELECT
MENU CHOICES
ARE DISPLAYED IN THE
STATUS DISPLAY LINE
PUSH AND HOLD
FOR 5 SECONDS
76