ASSEMBLY INSTRUCTION SKU CODE: (WF281612-WF281613-WF281614) SAFETY WARNINGS Follow the information on the warning label appearing on the upper bunk end structure and on the carton... Do not remove waning label from bed. Amway use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. Surface of mattress must be at least 5 inches below the upper edge of guard rails. Bo not allow children under 6 years to use the upper bunk.
Hardware List Screws 1/4" x100 210 PCs Wood dowel PCs Wood Screws 55pcs 21/4" x 80 mm Half Moon Hex-Head bolts PCs PCs Allen Key 1pc Steel Bracket 21/4" x 25 mm 2pc Wood Screws PCs Hex-Head bolts PCs 10 1 n2 21/4" x 15 mm 21/4" x 50 mm 21/4" x 13 mm Canopy head thoughtless Hex-Head bolts PCs Horizontal-Hole bolts PCs n3 n4 ns 212 x 110 Wood dowel PCs Wood dowel 22pcs Wood Screws PCs 16 n7 18 Screws 1/4" x60 1/4" x 35 mm Screws 1/4" x50 PCs Hex-Head bolts PCs PCs Assembly Tools Required (Not Included) Co— 06
STE P 1 . Following below illustration Assembly Bottom bed's Headboard. Ming hardware #1 and dowel #2 connect A1 and A2 legs with B1 Frame. Look at data ll view for mor detail STE P 2: Following below illustration Assembly Bottom beds Headboard. Jock at detail view for more detail Ming hardware #3 connect Uncomplicated on step 1) with B3 to complete LEFT side of Bottom Bed.
STE P 3: Following below illustration Assembly Bottom bed's Foot board. Ming hardware #1 and dowel #2 connect A1 and A2 legs with B2 Frame. Look at detail view for more detail STE P 4: Following below illustration Assembly Bottom beds Headboard. 3 using hardware #3 connect Complemented on step 3) with B3 to complete RIGHT side of Bosom Bed.
=p STE P 5 : Following below illustration Using hardware #4,#5 and dowel #2 follow detail view to Assembly Bottom bed's Headboard(Completed on step 2) and & Footboard(Completed on step 4) with side rail at detail view for more detail 09/21
2x1 pcs STEP 6-1: ra lowing below illustration: with 2 Leg{center) D3 by using hardware #9. Following below illustration: STEP 6-2: {Completed on step 6-1) with Side Rail C5 by using hardware #3.
STE P 7: Following below illustration Assembly Sipper bed's Headboard. Ming hardware #1 and dowel #2 connect A3 and A4 legs with B4 Frame. Look at detail view for more detail © STEP 8: Following below illustration Assembly Upper bed's Headboard. Using hardware #3 connect Frame(completed on step 7) with BS Woodier using hardware #7 connect Frame with Bracket #8 to complete LEFT side of Upper Bad.
STE P 9: Following below illustration Assembly Upper bed's Foot board. 9 8 I Using hardware connect B7 Frame with B6 Wood bar Using hardware #7 connect Frame with Bracket #8. look at detail view for more detail STEP 10: Following below illustration Assembly Upper bed's Foot board.
STE Following below illustration Assembly Sipper bed's Foot board. 10 9 Using hardware connect B7 Frame with B6 Wood bar Using hardware #7 connect Frame with Bracket #9. & Look at detail view for more detail Following below Illustration Using hardware and dowel #2 follow detail view to Assembly Upper bed's Headboard(Completed on step 8) and ootboard(Completed on step 10) with Frame (Completed on step 11).
PCs) completed on step 13) Bottom Bed logs low illustration. Lay the Upper Bed (Col Dowel #13 to connect head of on Bottom Bed (Completed on step 8-2). Using the with end of Upper Bed legs.
STEP STAIRCASE Using hardware #9 and dowel #14 connect Support Bar (E15) with E1,E10 panels PCs STEP STAIRCASE Using hardware #9 and dowel #14 connect Uncomplicated on steppe-1) with E2 panel PCs 14 PCs STEP STAIRCASE Using hardware #9 and dowel #14 connect Frame(completed on steppe-2) with ES panel 16/21
¥ STEP STAIRCASE Using hardware #9 and dowel #14 connect Frame(completed on steppe-8) ith E12 Frame STEP STAIRCASE Using hardware #9 and dowel #14 connect Complaisant on steppe-7) with E7 Panel 18/21
STEP STAIRCASE 15 Using hardware #15 connect Complementary on steppe-8) with E4,E5,E6 Panels PCs STEP STAIRCASE Using hardware #16 connect E13 Frame with E14 Frame 16 PCs 19/21
18 ~N PCs STEP STAIRCASE Using hardware connect Frame(completed on steppe-8) with Frame(completed on staph-10) and E11 Frame 20/21
16 ~N PCs 7 ¥ Specs STEP 16 #17 connect the staircase with bunk beds k beds, Using #16, Align and fix the staircase and the bun CONGRATULATION. YOU HAVE COMPLETED THE BED.
