Installation Guide

STEP 1

：

1. Screw four feet (J)into the bottom of about Headboard and footboard, as show in Figure 1

2. Screw Hang Bolts (1) into Headboard (A).Make sure there is enough

length of the Hang Bolts (1) for next step as show in Figure 2.

3. Insert Hang Bolts (1) through the hole of Bed Rails (C) as shown in Figure 3.

4. Attach Bed Rail (C) to Headboard (A) using Crescent Spacer (2), and Nut (3).

tighten with Wrench(4) as show in Figure 4. Don't tight Nut (4) fully.

5. Repeat the steps 1,2,& 3 for Footboard (B).

6. When Headboard (A), Footboard (B) and Bolt Rails (C) fixed, please fully tighten all Nuts (3).

Figure 2

Figure 3

Figure

1 *8 pcs

* 8 pcs

*1pcs

* 8 pcs

* 4 pcs

Figure 1

PAGE 1
STEP 1： 1. Screw four feet (J)into the bottom of about Headboard and footboard, as show in Figure 1 2. Screw Hang Bolts (1) into Headboard (A).Make sure there is enough length of the Hang Bolts (1) for next step as show in Figure 2. 3. Insert Hang Bolts (1) through the hole of Bed Rails (C) as shown in Figure 3. 4. Attach Bed Rail (C) to Headboard (A) using Crescent Spacer (2), and Nut (3). tighten with Wrench(4) as show in Figure 4. Don't tight Nut (4) fully. 5. Repeat the steps 1,2,& 3 for Footboard (B).