Instructions / Assembly

STEP 3
：
1. Put 10 pieces of Bed Slats (E) on the Bed Rails (C).
2. Install Slat Pack with slats starting and ending flush with the end of the
support cleat attached to your bed rails, As shown Figure 1.
3. Using Screw driver to tighten 20 Pieces of Wood Screws (8), as shown.
STEP 4
：
1. Attach 4 pices of Wheels (6) to the Slats under bed (H) with 16 pieces of Wood Screws (8)
as shown.
2. Use Screw driver to tighten to tighten Wood Screws (8), as shown.
STEP 5
：
1. Attach both outside 2 pieces Slats of under bed (H) to Front panel of under bed (F)
and Back panel of under bed (G) by 4 pieces of L metal connecter (7), as shown.
2. Use Screw driver to tighten 24 pieces of Wood Screws (9), as shown.
7
9
8 20 pcs
8 16 pcs
9 24 pcs
Figure 1
Flush
8
6
I
H
F
G
H
I
I
I
I
I
I
I
7
2 pcs
8
E
C