User's Manual

DuraLabel 4000 User’s Manual
12
2-2. Ribbon Installation
1. Open the top cover by pressing
the Cover Open Buttons on both
sides.
2. Install the rewind ribbon roll from
the right side of printer and then
fix it on left side.
3. Press the locking tenons and then
lift up the Printing Mechanism.
4. Place a new ribbon roll from the
right side of printer and then fix it
on left side.
【 Note 】
Please align the Ribbon Supply Wheel
with the fillister of ribbon roll core when
installing the ribbon roll. You can rotate
the black gear as figure showed to help
to align the ribbon roll core.