User's Manual

STE5 Operation Manual
26
RFID Module Testing Utility
1. Connect the STE5 to
PC and make sure it is
on standby mode.
Open the top cover
and printing
mechanism of printer.
2. Put a Smart Label on
the place that is
marked with red circle
in figure. This is the
place where the RFID
module is embedded.
3. Select the "RFID
Module Check"
function from
advanced functions on
SMM. The printer will
then keep beeping if
RFID module works
well.
4. To leave from RFID
Module Checking
mode, jut press the
FEED key on printer.