User manual

EZ2000 Plus / EZ6000 Plus User Manual
49
4-7. Installing the parallel / PS/2 adapter
1
Parallel cable
1
2
3 4
2
Parallel / PS/2 adapter
3
Connection cable
4
Screws (set of 2)
1. Check whether the printer
is switched off. Place the
printer on a flat surface
and open the printer
cover.
2. Unscrew the two screws
marked in the illustration
on the right and remove
the left-hand side of the
printer housing.
3. Unscrew the screws on
the parallel port cover and
remove the cover.