User manual

EZ2000 Plus / EZ6000 Plus User Manual
60
5-5. Adjusting the balance and print head tension
1. Open the printer side cover.
2. Pull out the print head release
lever as shown in the
illustration (1) and turn it
anticlockwise to a top right
position (2).
2
1
When using a variety of label stock
and ribbons, the ink may not be
evenly distributed. If there is no
printed image on one side of the
paper, or the ribbon wrinkles, the
print head pressure must be
readjusted using the TPH spring
boxes.
3. Move the TPH spring boxes as
shown in the illustration to
change the print head
pressure. The wider the
medium you are using, the
further out the TPH spring
boxes must be moved.
If there is no quality improvement,
you need to change the pressure on
the TPH spring boxes.
EZ2000 Plus
EZ6000 Plus
4. Turning the screw clockwise
increases the pressure, while
turning it anticlockwise
reduces the pressure.
+
-