Instruction Manual

- 17 - - 18 -

2. Mode selection: continuous lightingmode/ FX lighting effects Mode

Press SET select dial to enter the menu. The, Then the SET select dial to FX and turn

the DIM select dial to switch the two modes:

Continuous lighting mode: set FX mode to OFF to enter continuous lighting mode.

Tips: Turn DIM select dial to select light efficiency type, and then short press

DIM select dial to realize speed switching.

Fx3:

5974

5.1 Install battery case: Aim the handle's mounting screws into the battery case's

mounting holes, pull the batter case downwards until being tightened.

when is displayed, the silent mode is turned on.

Turn on the silent mode: press SET select dial to enter the menu. Then, turn the DIM

select dial to turn on or off the silent mode. Set it to on to enter non-silent mode while

set it to off to enter silent mode. In silent mode, the brightness adjustment range is

from 0% to 50%.

3. Brightness select dial：

turn the DIM select dial to adjust brightness.Press the DIM select dial once to turn off

the brightness. Press the DIM select dial again to recover the former brightness.

Fx1

Silent mode

Number Scene Display

FX2

FX1

FX3

FX4

Flash

Discontinuous

Slow speed

Press conference

Frequent

Medium speed

Paparazzi

Sustainable

Quick speed

Display IIIDisplay II

Flash

lightning

Broken bulb

Display

5. Install and detach battery case

5.1

FX Lighting Mode: 12 kinds of preset lighting effects in 4 scenes

4. Silent mode:

Ⅰ