Instruction Manual

- 19 -

- 20 -

SET

When the battery power is low, the low battery indicator will pop out.

In power on state, long press the SET select dial for 2 seconds and the locking icon

will appear on the display. Long press the button for 2 seconds again to unlock.

8.1 Short press the SET select dial enter the menu, turn the

SET select sial to Bluetooth, and then turn the DIM select dial to select OFF/Bluetooth

MAC code /Reset; When OFF is selected, Bluetoothis turned off. When Bluetooth MAC

code (e.g.: 5974) is selected,Bluetooth is turned on, and the Bluetooth icon appearson

the main interface. When Reset is selected, short press theDIM select dial to perform

Bluetooth reset.

8.2 Scan the QR code to download the "Godox Light" mobile app.(It can be used on

both Android and Apple systems) (QR code diagram) . For specific operations, please

refer to the "Help"manual of the mobile APP, which contains detailed tutorials.

Note: The first mobile device (mobile phone or tablet) can

directly use the APP to control the light body. When replacing

other mobile device (mobile phone or tablet), the light body

can only be connected with the APP normally after the Bluetooth reset.

Note: The locking function only works in panel function, the 2.4G wireless remote

control and Bluetooth control are not affected.

Fx3

5.2 Detach battery case: push the battery

case’ locking ring and push the battery

case upwards to take it out.

5.3 Connect the battery case with light

head: insert the one end with clamping

buckle of the power cable into the battery

case while another end into the DC power

socket of the light head.

5.4 Insert two NP-F970 batteries, and the

LED light can be put into usage.

Fx3

6. Low Battery Indication

7. Locking Function

LOCK

5.3

5.4

5.2

SET

DIM

8.Bluetooth Settings: