P/N. 920-0060611-02 Edition C 07.
QLABEL-Ҋ ......................................................................... 3 PART I: ABOUT QLABEL-Ҋ ......................................................................3 1: INTRODUCTION ....................................................................................................... 3 2: INSTALLATION ......................................................................................................... 3 PART II: STARTING ON QLABEL-IV.......................................................
20: DATABASE CONNECTION ................................................................................... 27 21. DOWNLOAD GRAPHIC, LABEL AND FONT .......................................................... 31 22. EAN -128 / GS1 DATABAR AND APPLICATION IDENTIFIER .............................. 33 APPENDIX: ADVANCE MENU DESCRIPTION..............................................................
QLabel-Ҋ Part I: About QLabel-Ҋ 1: Introduction An applied program for Windows 95/98/NT/2000/ME/XP/Vista, QLabel-Ҋis designed for page mode printer of EZ-1000/EZ-2000, EZ-Plus and EZ-DT series. QLabel-Ҋhelps users not only design labels, but also change the label data into an executive text file with optional extension (default .CMD extension). The executive file can be run by DOS commands such as COPY, TYPE, and PRINT etc.
3. Select the directory that you would like to save for the QLabel-Ҋ program and related files. You can create a new directory or choose one on your hard disk. If you use an established directory, specify the full path name of the directory. Type the name of the directory, or accept the suggested default path then press “NEXT”. 4. The Start Copying Files dialog box shows your current setting. Please check these items correctly and then click “NEXT”.
5. QLabel-Ҋwill copy all the necessary files from the QLabel-Ҋ disks. 6. At once QLabel-Ҋ program installation completed, it will display the QLabel-Ҋ icon. Click the icon to start the program.
Part II: Starting on QLabel-IV 3: Start QLabel-Ҋ Click Start, point to Programs, point to the QLabel-Ҋ folder, and then click the QLabel-Ҋ program. Or click the QLabel-Ҋ icon on desktop to start QLabel-Ҋ program directly. 4: Working Environment When you open a new label, there are two working areas on the screen. The left-hand side of the screen is the Label Edit Area, and the right-hand side is the Command Edit Area.
5: QLabel-IV Toolbars Toolbars help you to use commands in QLabel-Ҋ quickly.
Part III: Working with Labels 6: Opening, Creating and Saving Labels Create a new label On the File menu, click “New” or on the toolbar to create a new label. Save changes to a label 1. To save the new file, click the “File” menu, click “Save As”, and then type in a new file name. , click “Save” button in the Command Edit Area, and 2. To save the new file with the text type, click built-out then type in a new File name.
Setup printer 1. On the File menu, click “Printer Setup”. 2. Select the model of barcode printer. 3. Change settings in the Printer Setup dialog box.
Label setup 1. On the File menu, click “Label Setup”. 2. Change settings in paper type, paper dimensions and label layout. 3. Click “OK” to complete label settings. z z z z z z z z z Label paper: Check on paper with gap and set Gap Length. Plain paper: Check on Plain paper and set Feed paper length. Black mark paper: Check on Black mark label, and enter new values. Black mark width and Black line to top of form position. Horizontal: sets the number of columns of labels on a page.
Setting the Advance These are default setting for 9600 baud rate, parity none, data length 18 bit, stop bit 1. The advance setting is for the use of RS232 com port connection. 1. Click “Printer Setup” from the File menu. 2. Click the “Advance” table. 3. Click new setting.
7: Inserting Text Insert a text with printer’s font 1. Click . 2. On the Text Setup dialog box, select font type, size, and rotation angle, horizontal and vertical expansion you would like to create on the label. 3. Input text in the Data column. Alternative select from the Load button to open the existent text file. Note. z Internal Font: Printer’s font. z Asian Font: you can download the Asian Font to flash memory.
Download True Type Font QLabel-IV supports True Type Font download function for EZ-PLUS / EZ-DT printers only. 1. Click . 2. On the Text Setup dialog box, select font type. 3. Select a True Type Font, and then click OK to start download process.
Insert a text with Window’s Font 1. 2. 3. 4. Click . On the Window Text Setup dialog box, click the font and rotation angle you would like to create on the label. Input text in the Text String column. If click “Change to Graphic” button, the text could be transforming into a graphic to enhance printer performance. Transformed graphics are unable to modify any longer. Please refer to the chapter of graphics for details information. 5. In data source function, you can connect text string with a database.
8: Inserting a Barcode 1. Click . 2. On the Barcode dialog box, select a barcode type, rotated angle, readable, barcode wide/narrow ratio and height you would like to create on the label. Please acknowledge the barcode standard on each type as the label ratio affection on CCD readability. 3. DataSource setting is the same as in the previous “Text Setup” chapter. Please refer to the “Advance Menu Description” for the functionality of “Insert…” serial and variable numbers. 4.
9: Drawing Lines and Shapes Drawing a straight line or box 1. Click . 2. Drag the pointer diagonally in the direction and size you would like to create a label. 3. To change the thickness or brush style, double click the line or box, and then input width and height. Drawing a square-corner rectangle or square 1. Click . 2. Drag the pointer diagonally in the direction and size you would like to create a label. 3.
Drawing a round-corner rectangle or square 1. Click . 2. Drag the pointer diagonally in the direction and size you would like to create a label. 3. To change the thickness, double click the rectangle, and than input width, height, line width, brush style and color in the Ellipse/ Rounded Rectangle Setup dialog box. Brush Color: Drawing an ellipse or circle 1. Click . 2. Drag the pointer diagonally in the direction and size you would like to create. 3.
10: Inserting MAXICODE 1. Click . 2. In the MAXICODE dialog box, select a symbol number, numbers and mode you would like to create the label. 3. Input country code, service class and postal code. 4. Input barcode data in the Message column (up to 84 characters). 11: Inserting PDF417 1. Click . 2. In the PDF 417 Setup dialog box, input width, height, error correction level, number of rows and column you would like to have in a label. 3. Input data and select rotated angle of 0° or 90°.
12: Inserting DataMatrix Code 1. 2. 3. 4. Click . Input data on the Number of encoded data box. Select multiple numbers from 1 to 8. To put a serial or variable numbers in the label, select “Inset…” button. Please refer to the “Advance Menu Description” for the functionality of “Insert…” serial and variable numbers.
13: Inserting QR Code 1. 2. 3. 4. 5. Click . Input data on the Number of encoded data box. Select rotated angle for QRCode setup. Select multiple numbers from 1 to 8. Select error correction level, mask factor, original or enhanced type and data mode character set. 14: Inserting Graphics Insert graphics from file 1. 2. 3. 4. 5. 6. 7. 8. Click . Select a halftoning of dithering you would like to create in a label. Input width, height you would like to have a graphic. On the Graphic dialog box, click Load.
21
15: Lock Objects 1. Click . 2. All objects in the Label Edit Area will be locked, and not be able to move nor edit. 3. Click again to unlock objects. Notes. z In the Draw Bar setting dialog, the “Lock” function setup for each object. 16: Print Previous printed Label 1. Click 2. Input quantity to print you would like to have. Note: z If label has serial number, you can use this method to keep on printing.
Part IV: Advance Menu 17: Command Edit Area When you create a label in the Label Edit Area, you can click to show the commands in the Command Edit Area. In this area, you can save commands as a text file or send the commands to the printer. You also can open an existing file by click “Open”. Advance programmer could edit commends and send commends such as COPY, PRINT, TYPE etc to printers in DOS mode. 18: Using Serial and Variable Number Insert Serial Number 1. 2. 3. 4. Insert a text or barcode.
Edit Existing Serial Number 1. Double click the object that you would like to edit. 2. 3. 4. 5. In the Data source, select “Insert”, and click “Edit Serial Number” or click In the Edit Serial dialog box, click the item you want to edit. Click the item again, the data will be highlighted. Input new values and then press “OK”. 24 toolbar.
Insert Variable 1. 2. 3. 4. Insert a text or a barcode. Double click on the object. In the Data source, click “Insert..”, and select “New Variable. In the New Variable dialog box, input length and select justify value you would like to align variables. Edit Existing Variable 1. 2. 3. 4. 5. Double click on the object that you would like to edit. In the Data source, click Insert, and select “Edit Variable”. In the Edit Variable dialog box, click an item you want to edit.
19: Using Real Time Clock Setup Printer Date and Time 1. 2. 3. 4. 5. 6. Go to Advance toolbar, select “Printer Date/Time Setup”. In the Date/Time Setup dialog box, click Year and Month type. Click Reset to clear original setting. Input a new date and time. Click Send Setup Command button to send new time settings to printer (before sending a new date and time to printer, make sure printer is ready and “Ready LED” must in green light). Click OK to close the Date/Time Setup dialog box.
20: Database Connection Database connectivity is to link up an existing database with a label format such as Excel, Access, and dBase files. And we don’t need to do the duplicate work of keying all the data again. After connecting with a database, . If click the “Send” button in command edit area, the printer the printing has to be operated through print icon will print the single data only displayed on the screen. Use DBF file connection 1. Go to Database menu, click “Open DBF file”. 2.
Use ODBC Connection 1. Go to Database menu, click ODBC Connect. 2. Select a Database Type and Table name you would like to connect. 3. Go to “ODBC Administrator” to replace a database directory. Note. Before you use the ODBC Connect function, you should use Windows Control Panel to install the new ODBC driver. The ODBC driver is the appended to application software that you use (such as FoxPro, Access and more). When you install the ODBC driver, you must define one or multiple data source.
Database operation 1. Double click a text or a barcode. 2. On the Data Source, click “Insert Field”. 3. Select a Field Name you would like and then click OK.
Frame Boarder of Database 1. Go to Database menu, select Frame Boarder. 2. In the Label Edit Area shows the maximum data length of the connected database. This could help to design a proper label within a label printable area. 3. Select a Field Name you would like and then click OK. Database Viewer 1. Go to Database menu, select “Database Viewer”. 2. In the Database, you can sort a data by an alphabetical order or search data value on the database. 3. Click “Edit Mode” to edit the database.
21. Download Graphic, Label and Font Download Font 1. Go to Advance menu, select Download and click Font. 2. Select a Font, Style, Size and Effects you would like to create a label. 3. Click Font ID, and then click OK. Delete Font From Advance menu, go to “Clear Memory” and then select “Delete Font”.
Download Labels 1. Go to Advance menu, select Download and click Label. If select “Quick Download to Printer”, system will input label name automatically by selecting the graphic title. 2. Input a Label Name, and then click “OK”. Note. z Before you download labels, make sure printer is ready. If you would like to download from external memory, please install memory before turn on the printer. Delete Labels 1. From Advance menu, go to “Clear Memory” and then select “Delete Labels”. 2.
22. EAN -128 / GS1 Databar and Application Identifier Input the Application Identifier in EAN-128 Barcode QLabel-IV supports Application Identifier (AI) in EAN-128 barcode. AI is a series of codes that can contain pre-defined data type and actual data content in single data string. Each AI has 2 ~ 4 digits numeric Prefix in front of the data to tell what the data means. For example, (11) represents the production date that should conform to the format of "n2+n6".
On the Barcode Setup page of EAN 128, GS1 Databar Expanded and GS1 Databar Expanded Stacked barcodes, there is an "AI Wizard" to help user entering the data content of AI. To enter the "AI Wizard" setup page, please click "W..." button on the Barcode Setup page. On the left side of "AI Wizard" page, there is a list of AI codes to show the Identifier and description of each AI code.
Double click one of AI codes from the list, and then the Identifier of the AI code will be moved to the "AI" box on the "ShowDataList" area. Input the data content on "DATA" box following the data format that displayed on "Sample" box and then check the tick box on the right side of "DATA" box to complete the data input of AI code. If the input data doesn't conform to the rule of the AI code and still check the tick box, then the "DATA" box will turn to Red and cannot proceed to next set of AI code.
If you need input more than one AI code in a barcode, you can repeat above process to input data content in multi columns. Make sure that all of AI code data are input correctly and then click the "Combine" button to combine all AI codes in a barcode. The "Combine_Items" will show how many AI codes are combined and the "Check Data" box will show the final result of barcode content. Check if the barcode content is correct and then click "OK" button to complete the AI data input procedure.
Appendix: Advance Menu Description Control: Display memory: Print Head test: Print Version message: Reset Printer: Printer Clock Setup Printer Serial Port Setup Paper Forward Paper Backward Buzzer Unit of Measurement Undo/ Redo Display external memory’s free spaces and name of the fonts, graphics and formats. This command will print a pattern for the user to determine if the print head is damaged. Print firmware version. Reset the printer. The LED will flash once.
Printer Date/Time Setup: Setup the printer’s date and time. Print Previous Printer Label: Repeatedly prints the indicated copies of last label format.
Label Information: To note the label information. Printer Option List: To setup options of the printer.