GODOX PHOTO EQUIPMENT CO.LTD Camera Flash TT600 Foreword Before using this product Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference. Thank you for purchasing a GODOX product. TT600 camera flash adopts Godox wireless X system and 2.4G ratio transmission, which is compatible with AD360II-C、AD360II-N、TT685C、TT685N、X1T-C、X1T-N, etc. Fit all DSLR camera brands e.g. Canon, Nikon, Sony, etc.
For Your Safety z Always keep this product dry. Do not use in rain or in damp conditions. z This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. z Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.
Control Panel LCD Panel What’s in the Box of TT600? Separately Sold Accessories Attaching to a Camera Using the Flash Power Management Flash Output ZOOM: Setting the Flash Coverage M Mode Multi Mode: Stroboscopic Flash S1 Mode S2 Mode Hi-Speed Sync Triggering Custom Function----Focus Assist Beam Buzz Function Wireless Flash Shooting: Ratio (2.
Name of Parts z Body 01. Catchlight Panel 02. Built-In Wide Panel (Retracted) 03. Flash Head 04. Optic Control Sensor 05. Focus Assist Beam 06. Wireless Control Port 07. Sync Cord Jack 08. Hotshoe 09. Lock Ring 10. Battery Compartment z Control Panel 11. < MODE/ 12. < > Mode Selection Button/Wireless Mode Selection (Long Keypress) > Zoom / Function Custom Button (Long Keypress) 13. Group/ Channel Setting (Long Keypress) 14. Select Dial 15. < > Set Button 16. ON/OFF Power Switch 17. < 18.
z LCD Panel 19. Manual Flash Mode 20. S1 Slave Flash Triggering 21. S2 Slave Flash Triggering 22. Multi/Stroboscopic Flash Mode 23. < > High Speed Sync Triggering 24. < > Battery Level Indication 25. < > Sound Beep Indication 26. < > Sleep Status 27. < > Overtemperature Indication 28. < > Wireless Signal Transmission 29. < > Focus Assist Beam Indicator 30. Channel 31.
achieve best photography effects: Cells II high speed trigger, FT-16S power & trigger control, Car charger, Mini softbox, White & Silver Reflector, Honeycomb, Color gels, Snoot, etc. Attaching to a Camera 1. Attach the Camera Flash. Slip the camera flash’s mounting foot into the camera’s hotshoe all the way. 2. Secure the Camera Flash. Rotate the locking screw on the mounting foot until it locks up. 3. Detach the Camera Flash. Rotate the locking screw on the mounting foot until it is loosened.
2. Flash Output z Flash output can be varied from 1/128th power to 1/1 full power in 1/3 stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. z Adjust the power output by rotating Select Dial (14). The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output: Figures displayed when reducing flash output level→ 1/1-0.3 1/1-0.7 1/1 1/2-0.3 1/2-0.7 1/2 1/2+0.7 1/2+0.
5. Multi Mode: Stroboscopic Flash Press Mode Selection Button (11) to enter Multi mode (Stroboscopic flash). With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. For setting procedures, see the following: z Press the Mode Selection Button (11) so that “Multi” is displayed.
1 2 3 4 5 6-7 8-9 1/4 7 6 5 4 4 3 3 1/8 14 14 12 10 8 6 5 1/16 30 30 30 20 20 20 10 1/32 60 60 60 50 50 40 30 1/64 90 90 90 80 80 70 60 1/128 100 100 100 100 100 90 80 10 11 12-14 15-19 20-50 1/4 2 2 2 2 2 2 1/8 4 4 4 4 4 4 1/16 8 8 8 8 8 8 1/32 20 20 20 18 16 12 Flash Output Flash Output Hz Hz 60-199 1/64 50 40 40 35 30 20 1/128 70 70 60 50 40 40 To avoid overheating and deteriorating the flash head d
in response to the second, actual flash from the master. 8. Hi-Speed Sync Triggering z To enter z To exit mode, long press < > button and hold for 2 seconds. mode, press Mode Selection Button or long press < > button and hold for 2 seconds again. z In hi-speed sync triggering mode, you can use a hi-speed sync trigger to have your flash unit synchronized with all shutter speeds of cameras (max. 1/8000 second, up to your camera).
z The beam will automatically put out certain seconds after the last pop is fired. The time between the last fire and the auto shutdown of focus assist beam is called No-Flash Time. The time is user adjustable and set to 10 seconds by default. z Press < > button and hold for 2 seconds to enter Custom Function. Then press “SET” button to enter “FC” mode. The LCD panel displays “FC” (Auto shutdown of focus assist lamp) and “No-Flash Time”. Rotate Select Dial (14) to set a desired time for the flash.
z Group setting: Short press < GR/CH > button to select group. In Master mode, groups can be selected from M/A/B/C/D/E; while in Slave mode, groups can be selected from A/B/C/D/E. z As TT600 adopts Godox wireless X system, it is compatible with AD360II-C、AD360II-N、 TT685C、TT685N、X1T-C、X1T-N wireless control, etc. z See the picture below: m 12.
14. Custom Function----Sleep Function z This product is equipped with Sleep Function to avoid battery drain when the flash unit is idle. z Press < > button and hold for 2 seconds to enter the sleep Function Mode. The LCD panel displays “SL” (Sleep) and “Sleeping Time”. Idle time before entering Sleep Mode is 10 minutes by default. Rotate Select Dial (14) to set a desired time for the flash or to turn off Sleep Function. Press < > button to return. Idle Time Meaning OF Sleep Function is turned off.
Time Setting <3> 3 minutes <10> 10 minutes <30> 30 minutes SL <60> 60 minutes (OFF) enter Custom Functions. 2. Turn the Select Dial to adjust sleeping time. 3. Press button to return. *Press any button can wake up the flash. * The idle time before entering Sleep Mode is recommended to set short. This can ensure a longer battery life. FC Auto Power <10>10 seconds 1. Press button to OFF Time <20>20 seconds enter Custom Functions. of <30>30 seconds 2.
return. Backlight Backlight can be set as follows: 1. Press button to Setting :Always lighting enter Custom Functions. <12>:Off in 12 sec. 2. Press SET button to enter bL :Off states. bL 3. Turn the Select Dial to adjust. 4. Press button to return. OS Optic Mode Slave Off 1. Press button to S1 mode enter Custom Functions. S2 mode 2. Press SET button to enter OS states. 3. Turn the Select Dial to adjust. 4.
about 10 to 15 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit will then return to normal. z When the over-temperature protection is started, is shown on the LCD display. Number of flashes that will activate over-temperature protection: Power Output Level Number of Flashes 1/1 30 1/2 +0.7 40 1/2 +0.3 50 1/2 60 1/4(+0.3,+0.7) 100 1/8(+0.3,+0.7) 200 1/16(+0.3,+0.7) 300 1/32(+0.3,+0.7) 500 1/64(+0.3,+0.7) 1000 1/128(+0.3,+0.
1/128(+0.3,+0.7); 2. Other Protections The system provides real-time protection to secure the device and your safety. The following lists prompts for your reference: Prompts on LCD Panel Meaning E0 A failure occurs on the temperature sensor. Please send this kit to a maintenance center. E1 A failure occurs on the recycling system so that the flash cannot fire. Please restart the flash unit. If the problem still exists, please send this product to a maintenance center.
natural lighting effect. Technical Data Product Model TT600 Guide No. GN60 (m ISO 100) (1/1 power @ 200mm) Vertical Rotation Angle -7° to 90° Horizontal Rotation Angle 0 to 360° Power Supply Ni-MH batteries (recommended) or 4*LR6 alkaline batteries Full Power Flashes Approx. 230 (2500mA Ni-MH batteries) Recycle Time Approx. 0.1-2.6 seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator will light up when the flash is ready.
-It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary. -Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. -This product, except consumables e.g. flash tube, is supported with a one-year warranty. -Unauthorized service will void the warranty. -If the product had failures or was wetted, do not use it until it is repaired by professionals.
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.