User's Manual

Creating a Catchlight
With the catchlight panel, you can create a catchlight in the subject’s eyes to add life to the facial
expression.
1. Point the flash head upward by 90°.
2.
Pull out the wide panel.The catchlight panel will come out at the same time.
3. Push the wide panel back in.
* Push in only the wide panel.
* Follow the same procedures as for bounce flash.
ZOOM: Setting the Flash Coverage and Using the Wide Panel
The flash coverage can be set automatically or manually. It can be set to match the lens focal
length from 24 mm to 105mm. Also, with the built-in wide panel, the flash coverage can be
expanded for 14mm wide-angle lenses.

InManualZoommode,pressthe< ZOOM/C.FN >button.
* Turn the Select Dial to change the flash coverage.
* If <A> is displayed, the flash coverage will be set automatically.
z Point the flash head straight ahead and then upward by 90°. The catchlight will
not appear if you swing the flash head left or right.
z For best catchlight effect, stay 1.5m/4.9ft away from the subject.
If you set the flash coverage manually, make sure it covers the lens focal length so that
the picture will not have a dark periphery.