User's Manual

Full power flashes Approx. 230 (2500mA Ni-MH batteries)
Power saving Power off automatically after approx. 90 seconds of idle operation. (60
minutes if set as slave)
• Sync Triggering
Mode
Hotshoe, 3.5mm sync line, Wireless control port
•Color
Temperature
5600±200k
•Dimensions
W x H x D 64 *76*190 mm
Weight without
battery)
410g
Weight with battery 530g
Troubleshooting
If there is a problem, refer to this Troubleshooting Guide.

TheCameraFlashcannotbecharged.
z Thebatteryisinstalledinthewrongdirection.
¾ Installthebatteryisinthecorrectdirection.
z Thecameraflash’sinternalbatteryisexhausted.
¾ If<
>appearsandblinksontheLCDpanel,replacethebatteryimmediately.

TheCameraFlashdoesnotfire.
z Thecameraflashisnotattachedsecurelytothecamera.
¾ Attachthecamera’smountingfootsecurelytothecamera.
z TheelectricalcontactsoftheCameraFlashandcameraaredirty.
¾ Cleanthecontacts.
z <>or<>isnotdisplayedintheviewfinderofcamera.
¾
Waituntiltheflashisfullyrecycledandtheflashreadyindicatorlightsup.
¾ If the flash ready indicator lights up, but <> or <> is not displayed in the view finder, check