User's Manual

The product can be used in combination with the following accessories sold separately, so as to
achieve best photography effects:
FT-16S power & trigger control, Car charger, Mini softbox, White & Silver reflector, Honeycomb,
Color gels, Snoot, etc.
Attaching to a Camera
1. Attach the Camera Flash.
Slip the camera flash’s mounting foot into the camera’s hotshoe all the way.
2. Secure the Camera Flash.
Rotate the lock ring on the mounting foot until it locks up.
3. Detach the Camera Flash.
Rotate the lock ring on the mounting foot until it is loosened.
Power Management
Use ON/OFF Power Switch to power the flash unit on or off. Turn off if it will not be used for an
extended period of time. Setting as a master flash, it will turn the power off automatically after a
certain period (approx. 90 seconds) of idle use. Pressing the camera shutter halfway or pressing
any flash button will wake up the flash unit. Setting as a slave flash, it will enter sleep mode after a
certain period (adjustable, 60 minutes by default) of idle use. Pressing any flash button will wake it
up.

Disabling Auto Power Off function is recommended when the flash is used off camera.
(C.Fn-APO, see p.)
Slave Auto Power Off Timer is set to 60 minutes by default. Another option “30
minutes” is available.
(C.Fn-Sv APOT, see p.)
