User's Manual

This flash has three flash modes: E-TTL, Manual (M), and Multi (Stroboscopic). In E-TTL mode, the
camera and the flash will work together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available: FEC, FEB, FEL, HSS, second
curtain sync, modeling flash, control with the camera’s menu screen.
* Press <MODE> Mode Selection Button and three flash modes will display on the LCD panel one
by one with each pressing.
ETTL Mode
Press <MODE > Mode Selection Button to enter E-TTL mode. The LCD panel will display
<>.
● Press the camera release button halfway to focus. The aperture and effective flash range
will be displayed in the viewfinder.
● When the shutter button is fully pressed, the flash will fire a pre-flash that the camera will
use to calculate exposure and flash output the instant before the photo is taken.
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where
minor adjusting of the TTL system is needed based on the environment.
Setting FEC:
1. Press Function Button 2 < >. The icon < > and flash exposure compensation
amount will be highlighted on the LCD panel.
2. Set the flash exposure compensation amount.
● Turn the Select Dial to set the amount.
● “0.3”means 1/3 step, “0.7”means 2/3 step.
● To cancel the flash exposure compensation, set the amount to “+0”.