Instruction Manual

2.1.1 Color Temperature: enter CCT
interface and turn the select dial to
adjust color temperature from 2500K to
8500K. Turn the select dial leftwards to
decrease the value while rightwards to
increase.
Short press the select dial to choose
color temperature from 7 levels in recycle:
2500K/3300K/4200K/5600K/6500K/7500K/
8500K.
Adjust the value in each level: adjust 100
values in normal operation while 1000
values in quick operation.
Press MODE button and enter MODE
interface to choose CCT mode, RGB
mode, HIS mode, ROSCO and LEE gel
mode and FX light effects modes. Turn the
select dial to switch different
modes and short press the button to enter
the adjustable interface.
Power Supply
Insert the output end of the adapter
into the DC power socket and
connect the light to power source
with power cord.
AC Power Supply
Install the V-port battery onto the back
of controller. Then, turn on the power
switch to use the light.
V-port Battery Power Supply (Optional)
Operation
• Power switch:
Turn on/off the power switch to power on or
off the LED light.
- 15 - - 16 -
Note: please use the standard V-port
battery with 14.8V standard voltage.
Do not supply power with the battery
whose voltage is over 16.8V.
There are two charging ways:
CCT
RGB
HSI
CH GRA32
ROSCO
LEE FX
CH GRA32
• MODE button:
Note: the LED light will auto enter
MODE interface when being turned on.
2.1 CCT Mode