Instruction Manual

2.3.1 In HSI interface, turn the select dial to
adjust hue value from 0 to 360°. Turn the
select dial leftwards to decrease the value
while rightwards to increase.
2.3.2 Turn the select dial to adjust
saturation value from 0 to 100. Turn the select
dial leftwards to decrease the value while
rightwards to increase.
After setting all these parameters, press
MODE or BACK button to back to the MODE
interface.
Adjust the value in each level: adjust 1 value
in normal operation while 10 values in quick
operation.
2.2.1 In RGB interface, turn the select dial
to adjust R value from 0 to 255. Turn the
select dial leftwards to decrease the value
while rightwards to increase.
2.2.2 Turn the select dial to adjust G value
from 0 to 255. Turn the select dial leftwards to
decrease the value while rightwards to
increase.
2.2.3 Turn the select dial to adjust B value
from 0 to 255. Turn the select dial leftwards to
decrease the value while rightwards to
increase.
2.2.4 Turn the select dial to adjust W value
(saturation) from 0 to 100%. Then, short press
the select dial to adjust I value (brightness)
from 0 to 100%.
After setting all these parameters, press
MODE or BACK button to back to the MODE
interface.
2.1.2 Hue adjustment: in CCT interface,
turn the select dial to adjust hue value
from -50 to 0 to 50. Turn the select dial
leftwards to decrease the magenta value
while rightwards to increase green color.
Short press select dial to quickly set
the hue value to 0.
Adjust the value in each level: adjust 1
value in normal operation while 5 values in
quick operation. 1000 values in quick
operation.
CH GRA32
R
123
G
B
W/I
34 34
34
CH GRA32
CH GRA32
HSI
CH GRA32
360
46 40
%
°
S I
2.1.3 Brightness adjustment: in CCT
interface, turn the select dial to adjust
brightness from 0% to 100%. Turn the
select dial leftwards to decrease the value
while rightwards to increase.
Short press the select dial to turn off
the brightness and press it again to
recover the former brightness value.
Adjust the value in each level: adjust 1
value in normal operation while 10 values
in quick operation.
2.2 RGB Mode Setting
2.3 HSI Mode