Instruction Manual

In MENU interface, choose Bluetooth and
short press button to enter Bluetooth
interface.
3.2.1 Bluetooth Power Switch: turn the
button to turn on or off the Bluetooth.
3.1.1 2.4G Wireless power switch: choose
wireless and turn the select dial to turn
on or off the wireless.
3.1.2 CH channel adjustment: choose
channel and turn the select dial to
choose channel value from 1 to 32.
3.1.3 GR Group adjustment: choose group
and turn the select dial to choose
group value from A, B, C, D, E and 0 to 9.
3.1.4 ID Setting: choose ID and turn the
select dial to choose ID value from 01 to
99.
Choose wireless mode and short press
select dial to enter wireless setting
interface. Then, short press the button
to choose wireless power switch, channel
CH, group GR and ID. Turn the button
to set and short press it to confirm.
Press the MENU button to enter MENU interface. Turn the select dial to
choose control mode from 2.4G wireless remote control, Bluetooth control and
DMX control. After setting all the modes, press the MENU button to back to the
MENU interface.
CH GRA32
R
123
G
B
W/I
34 34
34
1
 
FX

CH GRA32


DMX

FX

02
E
97


MAC0004
FX

CH GRA32


DMX

Quick custom function setting button 1, 2,
3 and 4: long press the button for 3
seconds to save the current set parameter
or recover the preset values. Short press
the button to change the preset
parameters quickly.
2.6 Quick Custom Function
Control Mode Selection
Bluetooth Control/2.4G Wireless Control/DMX Control
3.1 2.4G Wireless Setting
With 2.4G wireless system, LD series LED video light has remote grouping and
control function. It is recommended to purchase RC-A6 remote control(optional) to
achieve wireless control. Up to 16 groups of LED lights can be controlled,
32channels and 99 IDs are available with strong anti-interference capability.
Note:
1. Please make LED light's channel (CH), group (GR) and ID to the same as remote control's.
2. The wireless signals can only be received in the situation that the LED light is powered on.
3.2 Bluetooth Setting