User's Manual

unit possesses the wireless ID function.
4. Wireless ID Settings
Press the MENU button to enter C.Fn-ID to
Note: This can only be used when the master
choose OFF or any figure from 01-99.
AD100Pro adopts Godox 2.4G wireless X system, which has good
compatibility with other products of our company. As a Receiver unit,
AD100Pro is automatically compatible with Canon/ Nikon/ Sony TTL system
according to the master unit. Nikon cameras (use X1T-N), Canon cameras
(use X1T-C) and Sony cameras (use X1T-S) can use one or more
AD100Pro-TTL flashes simultaneously.
Wireless Flash Shooting: Radio (2.4G) Transmission
1. Wireless Settings
Press the wireless selection button to switch wireless function ON/ OFF.
Turn the wireless function on, the < > icon will be displayed on the OLED
panel. When using triggers of other brands, please turn off the wireless
function.
If there are other wireless flash systems nearby, you can change the channel
IDs to prevent signal interference. The channel IDs of the master unit and the
Receiver unit(s) must be set to the same.
2. Setting the Communication Channel
Long press the <GR/CH>
1Button for 2 seconds, so
that the icon will be
displayed on the OLED
panel.
Turn the SET Select
2Dial to choose a
channel ID from 1 to
32.
Press the <SET>
3button to confirm.
3. Setting the Communication Group
Short press the < GR/CH > button to choose group ID from A to E.
● Autoflash Shooting with One Receiver Unit
Positioning and Operation Range (Example of wireless flash shooting)
Transmission distance
is about 100m
21
CH
M
A
1/256 + 0.6
85mm
S2
85mm
S2
85mm
21
CH
A
1/256
28mm
Multi
5 - 5 Hz
21
CH
M
A
1/256 + 0.6
85mm
S2
85mm
S2
85mm
21
CH
A
1/256
28mm
Multi
5 - 5 Hz
● Use the supplied stand to position the Receiver unit.
● The transmission distance might be shorter depending on the conditions such
as positioning of Receiver units, the surrounding environment and whether
conditions.
● Before shooting, perform a test flash and test shooting.
● With a lot of wireless signal interference conditions, if you miss flash, please
change the wireless communication channel.
- 37 - - 38 -
99
C.Fn
Ver 0.4
WL
ID
DELAY
Receiver
Transmitter