AD 1200Ws TTL 1200Ws TTL Power Pack Kit GODOX Photo Equipment Co., Ltd. /Add: 2 Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen, China /Tel: +86-755-29609320(8062) /Fax: +86-755-25723423 /E-mail: godox@godox.com http://www.godox.
Warning Foreword Before using this product Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference. Thank you for purchasing a GODOX product. 1200Ws TTL Power Pack AD1200Pro Kit includes a flash head and power pack. When using Godox 2.4G wireless X system off camera, AD1200pro Kit can be triggered by XPro, X1 and X2 series flash trigger in TTL/M/Multi mode, etc.
Contents 25 26 29 33 33 34 34 35 35 36 36 37 37 38 40 41 44 45 45 Conventions used in this Manual This manual is based on the assumption that both the camera and camera flash’s power switches are powered on. Reference page numbers are indicated by “p.**”. The following alert symbols are used in this manual: The Caution symbol indicates a warning to prevent shooting problem. The Note symbol gives supplemental information.
Name of Parts Name of Parts Power Pack: Control Panel: Control Panel Light Sensor Handle < >Menu Button < >Mode Selection Button < >Group/Channel Button < >Wireless Selection Button Top Protect Cover 3.
Name of Parts Name of Parts Lithium Battery LCD Panel (2) M Manual Flash M CH 21 A Flash duration Charging Indicator M: Manual flash 1/16 Body Battery Locking Ring Handle of Battery Manual flash output +0.6 Battery Socket 10% t.
Installing Reflector (Other Accessories) Included Accessories 1. Power pack 2. Flash head 3. Lithium battery 4. Charger 5. Power connection cord 6. Reflector 7. Glass protection cover 8. Portable bag 9. Instruction manual 1 Press down the Lamp Cover Locking Ring. 2 Insert the reflector into the accessory mount and clock wise to lock it up.
Name of Parts Unloading Adjusting Handle 1 1 When the Direction Adjusting Handle is not pulled out, screw clockwise while unscrew anti clockwise. 2 The Direction Adjusting Handle's rotation angle should be restrained from 0 to 240 degrees below the flash body. Please pull out the Direction Adjusting Handle, adjust the appropriate angle, and manipulate the step 1 before colliding with the flash body. Push up the Battery Locking Ring and the rod pop out.
Wireless Flash Mode Flash Mode — M: Manual Flash AD1200Pro Kit can only be set as slave unit (receiver end). Press Wireless Selection Button to switch the two wireless modes: built-in wireless transmission and external wireless transmission. The flash output is adjustable from 1/1 full power to 1/256th power in 0.1 or 1 step increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output.
Flash Mode — M: Manual Flash Flash Mode — Multi: Stroboscopic Flash Display Flash Duration Flash duration refers to the length of time that from flash’s firing to reach the half peak at maximum. The half peak at maximum is usually expressed as t=0.5. In order to provide the photographer with more concrete data, this product adopts t=0.1. The difference between t=0.5 and t=0.1 is shown in the following picture. With stroboscopic flash, a rapid series of flashes is fired.
Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Flash Shooting: Radio (2.4G) Transmission AD1200Pro Kit adopts Godox 2.4G wireless X system, which has good compatibility with other products of our company. As a slave unit, AD1200Pro Kit is automatically compatible with Canon E-TTL II, Nikon i-TTL, Sony, Olympus, Panasonic and FUJIFILM system according to the master unit.
Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Multiple Flash Shooting C.Fn: Setting Custom Functions Custom Function Signs Functions You can divide the slave units into two or three groups and perform TTL autoflash while changing the flash ratio (factor). In addition, you can set and shoot with a different flash mode for each firing group.
Modeling Lamp Protection Function Modeling Lamp 1. Over-Temperature Protection AD1200Pro Kit is equipped with a 40W LED modeling lamp which has two continuous lighting modes: Percentage and PROP. • There are three modes: OFF, Percentage and PROP. Short press the Modeling Lamp Button, and the three mode will be displayed on the LCD panel in sequence. 1. OFF: the modeling lamp is off. 2. Percentage: 1%~100%. 3. PROP: The modeling lamp's power changes with the flash's power.
Technical Data Troubleshooting Model Flash Mode AD1200Pro Kit Wireless off M/Multi Slave unit of radio transmission TTL/M/Multi compatible with Canon, Nikon, Sony, Olympus, Panasonic, Compatible Cameras under Radio Fujifilm and Pentax Transmission (as slave unit) 124 (m ISO 100, with high-efficiency standard reflector) Guide No.
FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
