User Manual

Meaning
A failure occurs on the recycling system so that the flash cannot fire.
Please restart the flash unit. If the problem still exists, please send
this product to a maintenance center.
The system gets excessive heat. Please allow a rest time of 10 minutes.
The voltage on two outlets of the flash tube is too high. Please send this
product to a maintenance center.
There are some errors occurred during the upgrading process. Please
using the correct firmware
upgrade method.
Prompts on LCD Panel
E1
E2
E3
E9
Number of flashes that will activate over-temperature protection in high-speed sync triggering mode:
2. Other Protections
● The system provides real-time protection to secure the device and your safety. The following lists prompts
for your reference:
Technical Data
- 41 -
Power Output
1/1
1/2(+0.3,+0.7);
1/4(+0.3,+0.7);
1/8(+0.3,+0.7);
1/16(+0.3,+0.7)
1/32(+0.3,+0.7)
1/64(+0.3,+0.7);
1/128(+0.3,+0.7);
1/256(+0.3,+0.7)
Times
Speedlite flash head
20
30
50
75
80
100
Bare bulb flash head
50
60
75
100
150
200
AD200Pro
Radio transmission mode (compatible with Nikon & Canon & Sony& Fujifilm & Olympus
& Panasonic & Pentax )
Wireless off
Slave unit of radio transmission
Nikon cameras (X1T-N as master unit)
Canon EOS cameras (X1T-C as master unit)
Sony cameras (X1T-S as master unit)
Fujifilm cameras(X1T-F as master unit)
Olympus cameras(X1T-O as master unit)
Speedlite flash head: 52 (m ISO 100, @35mm)
Bare bulb flash head: 60 (m ISO 100, with the AD-S2 standard reflector, @28mm)
Speedlite flash head: 1/220 to 1/15380 seconds
Bare bulb flash head: 1/220 to 1/13510 seconds
200W
9 steps: 1/256~1/1
Provided (up to 90 times, 99Hz)
Manual. FEB: ±3 stops in 1/3 stop increments.
High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
0.01~30 seconds
S1/S2
Slave, Off
5 (A, B, C, D, and E)
100m
32 (1~32)
01~99
Lithium battery pack (14.4V/2900mAh)
500
Approx. 0.01-1.8s
√
Power standby automatically after approx. 30 minutes of idle operation.
3.5mm sync line, Wireless control port
5600±200k
Change within ±100K over the entire power range in color temperature mode.
M/Multi
TTL/ M/Multi
√
√
√
√
Dimensions
Dimension
Net Weight
172x54x75mm (flash head not included)
590g (flash head & battery not included)
- 42 -
Model
Wireless Slave Unit Mode
Flash Mode
Compatible Cameras under Radio
Transmission (as slave unit)
Guide No. (1/1 Output)
Flash Duration t.01 (approx.)
POWER
Power Output
Stroboscopic Flash
Flash Exposure Compensation (FEC)
Sync mode
Delay Flash
Mask
Beeper
Modeling Lamp (LED)
Optic Slave Flash
Flash Duration Indication
Wireless Flash (2.4G transmission)
Wireless flash function
Controllable slave groups
Transmission range (approx.)
Channels
ID
Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
Sync Triggering Mode
Color Temperature
Stable Color Temperature