User Manual

ManualsBrandsGodox ManualsLighting & StudioGemini 400Ws Monolight

说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: godox@godox.com http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Made In China

双子

系列影室闪光灯

Compact Studio Flash

705-GS2000-00

Summary of content (6 pages)

PAGE 1
双子系列影室闪光灯 GS Compact Studio Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
PAGE 2
Warning FOREWORD Thanks for choosing Gemini GSII series studio flash. It is a durable and good quality strobe with complete functions to help photographers create desired lighting effects. The product is suited for wedding, portrait, and product photography. The GSII flash offers: Built-in Godox 2.4G wireless X system Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in 0.
PAGE 3
LCD Panel NAMES OF PARTS 3 2 Body 4 5 11 12 5 13 4 3 7 FUSE: 5A AC220V-240V~50Hz 2 8 14 8 6 1 6 7 10 9 S CH 1 17 15 18 9 OFF PROP 12 % 10 11 1. Built-in 2.4G Wireless Transmission 2. Built-in Wireless Channel 3. Built-in Wireless Channel Dial 4. Slave Model Indicator 5. Beep 6. Temperature Alarm Display 7. Built-in Wireless Group 8. Flash Output 9. Modeling Lamp is off 10.Modeling Lamp is in the PROP mode 11.Modeling Lamp shows the power in percentage 12.
PAGE 4
OPERATIONS Flash Preparation 1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. (To uninstall the standard reflector, press the release button on the flash head and turn the standard reflector counter-clockwise to take it out, as illustrated in the picture.) 2. Attach the flash unit onto an appropriate light stand. Adjust the mounting bracket (16) for a good angle and make sure it is tightened and fixed.
PAGE 5
Slave Trigger Model Three slave triggering models are available and can be set by pressing slave model button (6). ◆No optical control: S1 or S2 is not displayed on the LCD panel, indicating the slave triggering function is shut down. ◆Optic S1 Secondary Unit Setting: In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor.
PAGE 6
The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering. To control the flash wirelessly, you need a FT-16 remote control set (oncamera and on-flash). Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoemounted transmit and receive ends will be wirelessly communicated to the flash.