User Guide

ManualsBrandsGodox ManualsContinuous LightingLR180 Daylight Ringlight

Instruction Manual | 说明手册Chinese English Bilingual | 中英文双语

LED Ring Light

LED环形灯

LR180

705-LR1800-00

Made In China

地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,

Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: http://www.godox.comgodox@godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Summary of content (5 pages)

PAGE 1
LED环形灯 LED Ring Light 深圳市神牛摄影器材有限公司 LR180 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
PAGE 2
Foreword 七、产品参数 LED环形灯 LR180 DC电源供电 16.8V/2A 功率约27W 色温黑色壳体：3300K或5600K Thank you for purchasing this Godox Product! This LED Ring Light LR180 is suitable for almost all shooting occasions, which can offer lighting for live, make up, portrait shooting, video, wedding, children photography, etc. There are black version and pink version for choice.
PAGE 3
Body Included Items 1. LED ring light 01 2. Adapter 3. Smartphone holder 4. White light-passing board 01. Light-passing Board 02. Main Body 03. Power Switch 04. Select Dial for Light Brightness 05. DC Power Jack 06. Mounting Bracket 02 (4) 07. Heat Dissipation Slot 08. Smartphone Holder Mirror Installation Slot 06 (2) (3) (1) Power Management 1. Power Supply Using DC power jack: use an adapter to connect the light with the DC power supply.
PAGE 4
Operation 5. Install and Detach the Light-passing Board Install: Aim the arrow on the light-passing board at the unlocking point and turn it towards the direction of locking point. Then, press the edges of board to make sure it is firmly fixed. Detach: Turn the light-passing board towards the direction of unlocking point and take it out. 1. Before Usage Connect the light with the DC power supply. 2. Power ON/OFF Press the power switch to power the LED ring light on or off. Install 安装 Technical Data 3.
PAGE 5
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.