User Manual

ManualsBrandsGodox ManualsLighting & Studio3-Monolight Kit

705-MS0000-00 Made In China

说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,

Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: godox@godox.com http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

MS SeriesCompact Studio Flash

系列影室闪光灯

Summary of content (6 pages)

PAGE 1
系列影室闪光灯 MS Series Compact Studio Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com 705-MS0000-00 http://www.godox.
PAGE 2
Warning FOREWORD Thanks for choosing MS series studio flash. It is a lightweight, compact and durable flash with complete functions. Design for shooting studio portrait and e-commerce product. This product is suitable for head shot, waist shoot, and certificate photography, as well as product shooting, etc. It can also offer high light, background light, or hair light in large studios and workshops. The MS flash offers: Built-in Godox 2.
PAGE 3
LCD Panel NAMES OF PARTS 3 2 Body 1 4 5 S CH 6 7 11 8 10 13 8 6 5 4 7 12 9 2 3 14 1 17 16 15 9 OFF PROP 10 % 12 11 8. Flash Output 9. Modeling Lamp is off 10. Modeling Lamp is in the PROP mode 11. Modeling Lamp shows the power in percentage 12. Modeling Lamp is off when triggering the flash 1. Built-in 2.4G Wireless Transmission 2. Built-in Wireless Channel 3. Built-in Wireless Channel Dial 4. Slave Model Indicator 5. Beep 6. Temperature Alarm Display 7.
PAGE 4
OPERATIONS Flash Preparation 1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. (To uninstall the standard reflector, press the release button on the flash head and turn the standard reflector counter-clockwise to take it out, as illustrated in the picture.) 2. Attach the flash unit onto an appropriate light stand. Adjust the mounting bracket for a good angle and make sure it is tightened and fixed.
PAGE 5
Buzz Function The sound button is used for deciding whether there is sound reminder for ready flash after recharging. When the buzz indicator is on the LCD panel, the buzz function is working; when it is disappear, the buzz function is not working. A “BI” sound will be heard when it’s fully charged. Setting the Communication Channel CH ON CH S ON S CH OFF ON S OFF OFF Key Combination Synchronously press the GR/CH button and the S1/S2 button can turn on/off the built-in wireless transmission.
PAGE 6
Tube Replacement Shut down the power and remove the power cord before replacing the flash tube. Wear insulated gloves to loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel sheet to fix the flash tube.