OOO 05. Wireless Bunion 06. Colored Paper Button 07. MOD Bunion 08. DIM Button 08. FN Button 18. CS Fir) Cr 10. + Button 11. — Bunion 12. DMX Input Port 13, DMX Output Port 14. Display ee What's In the Box Body *1 5m Power Cord *1 Adapter *1 R45 Cable *1 Clip* Steal Cable *2 Fortunes Bag *1 Instruction Manual *1 Battery Management 4. Power Supply With but-in: Rubidium battery which can offer about 2 hours lighting In 100% brightness nos got fully charged.
Operation 1. Power Switch Usa the power switch to control the on or off of the RGB tubs light. Then, the ‘cement Information will be displayed on the LCD pan 2. Mode Selection: Ci Special Effects Mode Cross MOD button to switch different modes: COTdRplaysdontssren HEI dismayed on he crossness Fess CET mods mane RGB mode 2.1 Blowhole Mode »2500TH {iE CT Modeler Mode/ £.99 2.1.1 Color temperature adjustment: press the "button to adjust the color temperature from 2700K to 2.1.2 Crass the DIM button, 6500K. 2.
4.3 DMX Control Modes 4.4 DMX LEAD and FOLLOW mode 4.3.1. Setts light to FOLLOW mode and press FN bunion to chase ADD, 4.4.1. Seton the LED lights to LEAD mode. 4.3.2. Prostheses or" bunion to et 512 ADD from 001 to 512. Now the 4.42 Brotherliness FOLLOW modes. indicator wil display bus. 4.4.3, Connect the lights with RJ45 cable. 4.3.3. After sat ADD, connect one snd of tha DMX cable to DMX output port of 4.4.4.
FCC Statement ‘This devices compiles with part 16 of the FCC Rules. Operation fs subject to the following two conditions: (1) This device may not cause thalami Interference, and (2) this device must scoot any interference received, including interference that mey ‘cause underhanded operation. Any Ganges or modifications not expressly approved by the party responsible for ‘compliance could void the user's authority to operate the equipment.
