User Manual
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.
It is useful in situations where minor adjusting of the TTL system is
needed based on the environment.
Setting FEC:
Turn the Select Dial to set the
2 amount.
● “0.3”means 1/3 step,
“0.7”means 2/3 step.
● To cancel the flash
exposure compensation,
set the amount to “+0”.
Press < SET > button again
3 to confirm the setting.
Press the SET Button and
1 the flash exposure
compensation amount will be
highlighted on the LCD panel.
High-Speed Sync
High Speed Sync (Hss flash) enables the flash to synchronize with
all camera shutter speeds. This is convenient when you want to use
aperture priority for fill-flash portraits.
- 33 -
- 34 -
ZOOM SYNC SLAVE
SET
MODE ZOOM SYNC SLAVE
SET
MODE ZOOM SYNC SLAVE
SET
● Setting the flash to High-speed Sync mode when it is on the camera:
Use the Flash Setting > Flash Light Function Setting on the
camera’s shooting menu to adjust settings of the flash light. More
details please refer to camera’s instruction menu.
Choose Sync cord jack/S1/S2 triggering method to achieve high-speed
sync flash.
Second-Curtain Sync
With a slow shutter speed, you can create a light train following the
subject. The flash fires right before the shutter closes.
● Setting second-curtain sync:
Use the Flash Setting >Flash Light Function Setting on the
camera’s shooting menu to adjust settings of the flash light. More
details please refer to camera’s instruction menu.
● When choosing FP on the “SYNC” setting, it means the
high-speed sync function is turned on.
● When choosing REAR on the “SYNC” setting, it means the
second-curtain sync function is turned on.
The flash output is adjustable from 1/1 full power to 1/128th power
in 1/3rd stop increments. To obtain a correct flash exposure, use a
hand-held flash meter to determine the required flash output.
Flash Mode -- M: Manual Flash
Press < MODE > button so
1 that < M > is displayed.
Turn the Select Dial to choose
2 a desired flash output amount.
In high-speed sync mode,
the adjustable flash range is
1/16~1/1.
MODE ZOOM SYNC SLAVE
SET
MODE ZOOM SYNC SLAVE
SET
SYNC.MODE
TTL
±0
-5.0 +5.0
TTL MODE TTL
ZOOM
M 16mm
LED AF
SYNC.
ANGLE
FP
BACK
ADJUST
END
SHOE MOUNT FLASH
Press the <SYNC> button to open the high-speed sync flash and
high-speed icon <> is displayed.
● Setting “Sync cord jack/S1/S2”high-speed sync flash:
● With high-speed sync, the faster the shutter speed, the
shorter the effective flash range.
● Multi flash mode cannot be set in high-speed sync mode.
● Over-temperature protection may be activated after 15
consecutive high-speed sync flashes.
● Try to avoid using high-speed sync flash, which will cut
short flash tube’s lifetime.
SYNC.MODE
TTL
±0
-5.0 +5.0
TTL MODE TTL
ZOOM
M 16mm
LED AF
SYNC.
ANGLE
REAR
BACK
ADJUST
END
SHOE MOUNT FLASH