TTL锂电圆头机顶闪光灯 TTL Li-ion Round Head Camera Flash INSTRUCTION MANUAL 说明手册 深圳市神牛摄影器材有限公司 在使用本产品之前: GODOX Photo Equipment Co., Ltd. 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将 来查询参考。 Before using this product: Please read this user manual carefully in order to ensure your safety 705-V1C000-00 Made In China and the proper operation of this product. Keep for future reference.
Foreword Warning Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V1C camera flash applies to Canon EOS series cameras and is compatible with E-TTL II autoflash. With this E-TTL II compatible Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. flash, your shooting will become simpler. You can easily achieve a Keep out of reach of children.
Contents 31 Foreword 32 Warning 35 Name of Parts Body Control Panel Dot-matrix LCD Panel LCD Panel in Three Modes What's in the Box of V1C Kit? Separately Sold Accessories 39 Battery 40 LED Modeling Lamp 40 Attaching to a Camera 40 Power Management 41 Flash Mode — E-TTL Autoflash FEC (Flash Exposure Compensation) FEB (Flash Exposure Bracketing) FEL: Flash Exposure Lock High-Speed Sync Second-Curtain Sync 44 M: Manual Flash 45 Multi: Stroboscopic Flash 46 Wireless Flash Shooting: Radio (
● LCD Panel Name of Parts (1)E-TTL Autoflash Zoom : zoom display (Page 54) : Automatic Focus length (Page 54) : Manual(Page 44) : High-speed sync (Page 43) ETTL : E-TTL II : Second curtain autoflash 01 sync (Page 43) 09 02 : Master unit flash ON Distance indicator display : Master unit 10 04 03 flash OFF : Flash exposure 11 05 06 07 compensation (Page 41) Flash exposure compensation amount 08 ● Body ● The display will only show the settings currently applied.
● What’s in the Box of V1C Kit? (4) Radio Transmission Shooting ● Master Unit Flash mode 1. Flash Unit 2. Lithium Battery 3. USB Battery Charger 4. USB Line 5. Charger 6. Mini Stand 7. Protection Case 8.
LED Modeling Lamp Battery ● Features 1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are 500. 2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit. 3. Take only 3.5 hours to fully charge the battery by using the standard battery charger. Press the Modeling Lamp Setting button to set the modeling lamp. Short press the Set Button to turn on or off the modeling lamp.
C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-STBY, Page 55) C.Fn Slave Auto Power Off Timer is set to 60 minutes by default. Another option “30 minutes” is available. (C.FnSv STBY, Page 55) FEB: Flash Exposure Bracketing You can take three flash shots while automatically changing the flash output for each shot from -3 to +3 in 1/3rd stops.
● If the subject is too far away and underexposure, the < > icon will blink in the viewfinder. Move closer to the subject and try the FE lock again. ● If is not displayed on the LCD panel, FE lock cannot be set. M: Manual Flash The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. ● If the subject is too small, FE lock might not be very effective.
Multi: Stroboscopic Flash With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. 1 2 Press button so that < MULTI > is displayed. Set the flash frequency and flash times. ● Press the Function Button 2 to select the flash times. Turn the Select Dial to set the number.
● Shooting with a Different Flash Mode set for Each Group Positioning and Operation Range (Example of wireless flash shooting) ● Autoflash Shooting with One Slave Unit Ceiling A D E-TTL II B Transmission distance is about 100m. Manual flash C Manual flash Manual flash ● Use the supplied mini stand to position the slave unit. ● Before shooting, perform a test flash and test shooting.
3. Setting the Communication Channel If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same. 1 Press
Using Automatic Wireless Flash with Multiple Slave Units When stronger flash output or more convenient lighting operation is needed, increase the number of slave units and set it as a single slave unit. To add slave units, use the same steps as setting “automatic wireless flash with a single slave unit”. Any flash group can be set (A/B/C/D/E).
Other Applications Sync Triggering The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter. Modeling Flash If the camera has a depth-of-field preview button, pressing it will fire the flash continuously for 1 second. This is called modeling flash. It enables you to see the shadow effects on the subject and the lighting balance. You can fire the modeling flash during wireless or normal flash shooting.
C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. C.Fn Custom Functions Custom Function Signs Function m/ft Distance indicator AF AF-assist beam STBY Auto sleep setting Sv STBY Slave auto power Setting No.
Technical Data Protection Function 1. Over-Temperature Protection Model ● To avoid overheating and deteriorating the flash head, do not fire Compatible Cameras Canon EOS cameras (E-TTL II autoflash) Power 76Ws more than 30 continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes. (1/1 output) Flash Coverage ● If you fire more than 30 continuous flashes and then fire more is shown on the LCD display.
Troubleshooting Firmware Upgrade If there is a problem, refer to this Troubleshooting Guide. ● The USB port is a Type-C USB socket. Type-C USB connection The Camera Flash does not fire. ● As the firmware upgrade needs the support of Godox G3 line is applicable. ● The camera flash is not attached securely to the camera. →Attach the camera’s mounting foot securely to the camera. ● The electrical contacts of the Camera Flash and camera are dirty. →Clean the contacts.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.