锂电机顶闪光灯 TTL Pioneering TTL Li-ion Camera Flash For FUJIFILM INSTRUCTION MANUAL 说 明 手 册 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 中英文双语 / Chinese English Bilingual 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 在使用本产品之前： 请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将 邮箱/E-mail: godox@godox.com 来查询参考。 http://www.godox.
Foreword Warning Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V350F camera flash applies to FUJIFILM series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. shooting will become simpler. You can easily achieve a correct flash Keep out of reach of children.
Contents 27 Foreword 28 Warning 31 Name of Parts Body Control Panel LCD Panel What's in the Box of V350F? Separately Sold Accessories 33 Battery 35 Attaching to a Camera 35 Power Management 36 Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync 38 Flash Mode – M: Manual Flash 39 Flash Mode – Multi: Stroboscopic Flash 40 Wireless Flash Shooting: Radio (2.
● LCD Panel Name of Parts (1) TTL Autoflash Zoom : zoom display Focus length TTL : TTL autoflash 01 02 03 09 04 05 06 : High-speed sync (Page 36) (2)M Manual Flash Flash exposure compensation amount M : Manual flash 07 MODE ZOOM SYNC SLAVE Manual flash output 10 (3)Multi Flash 08 ● Body Multi : Stroboscopic flash 01. Catchlight Panel 06. Hotshoe 02. Built-in Wide Panel 07. LCD Panel 03. Flash Head 08. Lock Ring 04. Optic Control Sensor 09. Battery Compartment 05.
● What’s in the Box of V350F? 1. Flash unit 2. Mini stand 3. Protection case ● Loading and Unloading the Battery 4. Diffuser 5. Li-ion battery pack 6. Battery charger 7. Battery charger cable 8. Instruction manual ● Separately Sold Accessories The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: XPro, X1T-F wireless flash trigger, Mini softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. Battery ● Features 1.
Attaching to a Camera 1 2 Attach the Camera Flash. ● Slip the camera flash’s mounting foot into the camera’s hotshoe all the way. Flash Mode: TTL Autoflash This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background. In this mode, multiple TTL functions are available: FEC, HSS, second curtain sync, etc.
High-Speed Sync High Speed Sync (Hss flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. ● Setting the flash to High-speed Sync mode when it is on the camera: Use the Flash Setting ＞ Flash Light Function Setting on the camera’s shooting menu to adjust settings of the flash light. More details please refer to camera’s instruction menu. .
Flash Mode – Multi: Stroboscopic Flash Maximum Stroboscopic Flashes: Flash Hz output With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. MODE ZOOM MODE SYNC ZOOM SLAVE SYNC SLAVE SET SET 1 2 3 SET MODE ZOOM SYNC SET SLAVE Press button so that is displayed.
MODE ZOOM SYNC Slave Unit Setting 5. TTL: Fully Automatic Wireless Flash Shooting 1 Autoflash Shooting with One Slave Unit SLAVE SET Long Press the button for 2 seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit. 1 2. Setting Master Unit’s Flash Mode MODE ZOOM SYNC 1 SLAVE SET MODE ZOOM SYNC SET 2 Press the Button to choose the group from M/A/B/C.
3 SET Taking the picture ● Each group fires at the set flash ratio. 7. Multi: Wireless Flash Shooting with Manual Flash MODE ZOOM SYNC SLAVE 1 SET 2 Setting stroboscopic flash. ● Long press the button for 2 seconds so that is displayed. Long press the button for 2 seconds again to exit. Setting flash output/flash frequency/flash times. ● Setting the flash output/flash frequency/flash times of the groups in the M mode. Setting the multi flash mode.
3. Whether the distance between the flash trigger and the flash is too close or not →Please turn on the “close distance wireless mode” on the flash trigger (＜0.5m): X1 series: press the test button and hold on, then turning it on until the flash ready indicator blinks for 2 times. XPro series: Set the C.Fn-DIST to 0-30m. 4. Whether the flash trigger and the receiver end equipment are in the low battery states or not →Please replace the battery(the flash trigger is recommended to use 1.
Using the Wide Panel Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14 mm. ● The catchlight panel will come out at the same time. Push the catchlight panel back in. ● When pull out the wide panel, the ZOOM will constantly be 14mm. The button will not work. Low Battery Warning If the battery power is low, < > will appear and blink on the LCD panel. Please replace the battery immediately.
Firmware Upgrade • Auto Focus Assist Beam Effective range (approx.) Center: 0.6~4m This flash supports firmware upgrade through the USB port. Update information will be released on our official website. • USB connection line is not included in this product. As the USB port is a Micro USB socket, please use Micro USB connection line. • As the firmware upgrade needs the support of Godox G2 software, please download and install the "Godox G2 firmware upgrade software" before upgrading.
Troubleshooting If there is a problem, refer to this Troubleshooting Guide. The Camera Flash cannot be charged. ● The battery is installed in the wrong direction. →Install the battery in the correct direction. ● The camera flash’s internal battery is exhausted. →If < > appears and blinks on the LCD panel, recharge the battery immediately. The Camera Flash does not fire.
