Operation Manual

- 30 -
*Hi-speed sync triggering mode is not available when V850II is
mounted onto the camera.
9. Custom Function--Focus Assist Lamp
● Under poorly-lit or low-contrast
conditions, you can press < >
button to turn on the focus
assist beam in order to make it
easier to autofocus.
● The beam will automatically put
out certain seconds after the last
pop is red. The time between the
last re and the auto shutdown of
focus assist beam is called
No-Flash Time. The time is user
adjustable and set to 10 seconds
by default.
● Press < > button and hold for 2
seconds to enter Custom Function.
Then press “SET” button to enter
“FC” mode. The LCD panel
displays “FC” (Auto shutdown of
focus assist lamp) and “No-Flash
Time”. Rotate Select Dial < > to
set a desired time for the ash.
Press < > button to return.
No-Flash Time Meaning
10 seconds
10 seconds after the last re, focus assist
lamp will automatically get out.
20 seconds
20 seconds after the last re, focus assist
lamp will automatically get out.
30 seconds
30 seconds after the last re, focus assist
lamp will automatically get out.
10. Buzz Function
● To turn the buzz function on or off,
press <
> button and hold for 2
seconds to enter Custom Function.
● Then press “SET” button
to enter “bp” mode. The LCD
displays“ON”means buzz is turned
on while “OF” means buzz is
turned off.
● When the buzzer is turned on,
<
>is shown on the LCD display.
Godox Cells II transceiver
(Optional
）
TTL wireless ash trigger
X1C /X1N (Optional
）
To avoid overheating or deteriorating the ash head during
high speed sync ash, the over-temperature protection function
will be activated automatically after 10 continuous high-speed
ashes and the ecycle time becomes 10 seconds longer.